Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W
ohnny101
Posted - 08/19/2010 : 15:01:56 I've had my Willem PCB 5.0 dual power for a few months and have programmed a C2 SST 27SF512 chip probally around 35 times with it succesfully once I got the hang of everything(software and erase jumper) However, last week I started having a big problem.
When I test for hardware it says it's present. Which it should since I never unhooked it. It also states it erased it sucessfully and when I perform a blank check it also states blank.
The problem is when I program a bin to the chip it comes up with an error code on bottom - Error at 0X000000 Chip = 0XFF buffer = 0X02
This is of course out of the ordinary and it does not work.
I have always used the USB for power. I have ensured my LTP1 is on ECP, and tried it on another computer with no luck. I have even ordered another chip and it does the same thing.
One thing I notice it the VPP led is never on anymore, and I thought it used to be on all the time?
The green power led is on, so it the Power led sometimes. I have always used software Ver.98d8.
Thanks for any help as this is very frustrating.
2 L A T E S T R E P L I E S (Newest First)
Polymero
Posted - 04/14/2015 : 00:39:20 Same problem here...i try use a 12v adapter too...someone know how to fix it?
ohnny101
Posted - 08/24/2010 : 13:57:04 Update: I tried using an ac adapter 12v in the other power input jack. Still the same problem. Anyone have any ideas before I buy another? Thanks.