| T O P I C R E V I E W |
| yelenavik |
Posted - 03/05/2009 : 15:10:36
Hello,this programmer have current protection from bad chip?and can work with chip lower than 3.3v ?.Thank's |
| 3 L A T E S T R E P L I E S (Newest First) |
| ZLM |
Posted - 03/25/2009 : 13:55:54
yes. The software Re4.0 is for both GQ-3X and GQ-4X. |
| supra |
Posted - 03/25/2009 : 06:08:02
quote:
Originally posted by ZLM
The GQ-4X has protection circuit to protect itself. Such as chip reversed installed in ZIF socket.
Most low voltage devices has "Backward Compatibility". For example, the 2.7V devices will accept 2.7V-5.5V operating voltage for programming. Such as AT25020(2.7V-5.5V),25SF010(2.7V-3.6V),Microchip 1.8V 93AAXX series(1.8V-5.5V).
So, the lowest voltage supported on the GQ-4X is 1.8V devices.
Can I upgrade from 3.01 to 4x using GQ-3x?
|
| ZLM |
Posted - 03/05/2009 : 20:38:53
The GQ-4X has protection circuit to protect itself. Such as chip reversed installed in ZIF socket.
Most low voltage devices has "Backward Compatibility". For example, the 2.7V devices will accept 2.7V-5.5V operating voltage for programming. Such as AT25020(2.7V-5.5V),25SF010(2.7V-3.6V),Microchip 1.8V 93AAXX series(1.8V-5.5V).
So, the lowest voltage supported on the GQ-4X is 1.8V devices.
|
|
|
