|T O P I C R E V I E W
||Posted - 01/02/2008 : 03:35:56
I have bought few weeks ago a programmer of eBay (on your shop)
I received today 10 pics 12F629 to try again program but it doesn't work.
I have installed the soft "DIY Programmer" when I have downloaded the archive "USB_PIC_CD.ZIP" on your website.
The programmer is detected (red led on when I read the PIC) but it's impossible to program a PIC.
After, I have downloaded WinPIC800, nothing is detected, I have this message "ERROR -> Hardware is not responding"
I don't know what to do ...
The programmer that I've bought is http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=3141
Thanks you for your help.
PS : I'm sorry if my english is not very good :p
|1 L A T E S T R E P L I E S (Newest First)
||Posted - 01/03/2008 : 20:04:56
This is USB PIC Programmer, not the JDM programmer.
Check your chip position in ZIF and orientation.
The pin 1 of PIC12F629 should in the pin 13 of ZIF socket. The software will show the chip position after you selected the chip type 12F629.
Only software in the "USB_PIC_CD.ZIP" will work with tis USB PIC programmer. No other software works on this programmer.