T O P I C R E V I E W |
Deff |
Posted - 04/19/2010 : 05:12:45 Hello, I bought this programmer in Ebay from a Chinese seller. From the beginning the programmer dont burn my M2764 and other. Internal hardware test says "O.K.". All EPROMs are o.k. and so I believe that the unit is defective. Burning time is few seconds only and is ending at adr. ~3F8. I have no guarantee and dont know manufacturer to ask for schematics or service manual. What can/should I do?
Greetz! Deff |
2 L A T E S T R E P L I E S (Newest First) |
Deff |
Posted - 04/23/2010 : 07:40:03 I use newest version v6.25! During installation older versions under XP Iīve got error messages and bluescreens and these on different PCs. I will read Simeonīs post next.
So, v5.9 is installed but problem unchanged. 2nd error: If I burn a 2732-25V-eprom Vpp is 20V only! |
ixlman |
Posted - 04/23/2010 : 06:58:28 What Version of software are you using? You must use version 3.27 or later. 5.93 will work. Also see Simeon's post from 11-30-2009. |