MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 AM29F080B-120EC Settings?

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List Spell Checker
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

   Insert an Image File
Check here to include your profile signature.
    

T O P I C    R E V I E W
Necrosaro420 Posted - 05/30/2014 : 22:11:42
There is not a setting in the programmer for the AM29F080B-120EC chip. I tried all of the other 29f080 settings and nothing seemed to work. What line of code would I need to add for this? Also using it on the GQ-4X with the ADP-077 Adapter. Thanks
6   L A T E S T    R E P L I E S    (Newest First)
ZLM Posted - 06/15/2014 : 23:37:48
You can use regular TSOP40-DIP32 adapter. It should work.
You can use ADP-082 + ADP-077
Necrosaro420 Posted - 06/08/2014 : 20:24:45
The problem is, there is not an option for the chip in the programmer software. There is a generic am29f080, and a am29f080b*PSOP44. My chip is 40 pin, with B at the end.
ZLM Posted - 06/07/2014 : 21:06:47
the AM29F080B is a common chip and it should be supported without problem. The TSOP40 adapter is only remapping pins into DIP32. I fyou can confirm the problem is the software algorithm, then a test chip is needed to findout the problem.

IF you can not get the chip ID correctly, then I suspect all your chips.
Necrosaro420 Posted - 06/06/2014 : 17:26:24
heeeeeelllo.
Necrosaro420 Posted - 06/02/2014 : 11:24:12
I bought 10, and all do the same. Yes they are 40's. All of the other tsop40's work fine.
ZLM Posted - 06/02/2014 : 06:51:16
If your chip is TSOP40 chip, then check your chip position in TSOP48 ZIF. The chip should in upper part of the ZIP, the pin 1 should at the top left corner. The voltage jumper on 5V position.

Also, make sure your chip is a good chip.

MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.05 sec. Snitz Forums 2000