MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-4X and M27C160 EEPROM

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List Spell Checker
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

   Insert an Image File
Check here to include your profile signature.
    

T O P I C    R E V I E W
synker Posted - 04/26/2016 : 04:08:54
Hi,

I bought GQ-4X for write some M27C160 EEPROM. I bought ADP-054 too for the old eeprom. Unfortunatly when I try to write our 2Mb file to the EEPROM the programmer goes to error immediatly. Is there any setting I need to success write the eeprom?
Thanks in advance

Image Insert:

281794 bytes
10   L A T E S T    R E P L I E S    (Newest First)
synker Posted - 04/27/2016 : 07:40:15
quote:
Originally posted by ZLM

Thank you Anniel.

The problem may come from chip itself or the adapter.

Please check followings:
1.chip pin contacting on all pins.
2. change to another chip and try. This will make sure your chip has no problem.
3. test the programmer with Voltage Diagnostic of software menu.



Thanks ZLM,

1. All chip pins contacting well
2. I tried 8 chips with the same result (same error)
3. here the programmer test log


*****************************
* Testing VCC Without Load *
*****************************
VCC 3.6V test passed (code:0x6160)+
VCC 5V test passed (code:0x8889)+
VCC 5.5V test passed (code:0x9090)+
VCC 6.2V test passed (code:0xa2a2)+
VCC 6.5V test passed (code:0xa2a6)+
*****************************
* Testing VPP Without Load *
*****************************
VPP 3.6V/5V test passed (code:0x1a1a)+
VPP 12V test passed (code:0x5051)+
VPP 12.7V test passed (code:0x4f50)+
VPP 15V test passed (code:0x6364)+
VPP 21V test passed (code:0x8686)+
VPP 25V test passed (code:0x9b9b)+
*****************************
* Test Completed *
*****************************



ZLM Posted - 04/27/2016 : 07:16:23
Thank you Anniel.

The problem may come from chip itself or the adapter.

Please check followings:
1.chip pin contacting on all pins.
2. change to another chip and try. This will make sure your chip has no problem.
3. test the programmer with Voltage Diagnostic of software menu.

This chip does not need external power supply. The USB power is good enough.

If all above can not find the problem, then you can send your programmer set to MCUmall for test/exchange.



anniel Posted - 04/27/2016 : 02:43:11
Maybe ZLM can kick in an give you pointers...
synker Posted - 04/27/2016 : 01:19:04
Same thing
anniel Posted - 04/26/2016 : 10:33:50
Try 27C160.
synker Posted - 04/26/2016 : 09:26:51
Thanks anniel but:

I tried to change USB cable, change pc, change Eprom, add PSU, change USB port without success!
Also if I try to change the J5 jumper (from V4 to V3) the programmer is not detected! Any other suggest?
anniel Posted - 04/26/2016 : 06:00:25
http://www.mcumall.com/forum/topic.asp?TOPIC_ID=6290
anniel Posted - 04/26/2016 : 05:49:39
J1 is ok. J5 is chip compatibility jumper change it if the chip has inconsistent reading, writing.
synker Posted - 04/26/2016 : 04:31:10
quote:
Originally posted by anniel

Did you erase the EPROM? Blank check? Set the jumpers on the ADP-054?



Eprom was erased by U/V and checked with Blank check. on ADP-054 J1 is 1-2 jumped and J5 is V4 jumped. Do I need any other jumper?
anniel Posted - 04/26/2016 : 04:24:10
Did you erase the EPROM? Blank check? Set the jumpers on the ADP-054?

MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.06 sec. Snitz Forums 2000