| T O P I C R E V I E W |
| tahir |
Posted - 04/18/2012 : 13:36:18
Hi could anyone help me I'm programing a mx29lv160 when I erase chip it says erase ok but fails blank check it program s ok but fails on verify but compares good is it possible the chip is faulty thanks |
| 6 L A T E S T R E P L I E S (Newest First) |
| vendest |
Posted - 02/01/2017 : 08:07:12
Managed to program successfully a MX29F800TMC-90 with TOP3100.
The programmer might just not be compatible with MX29LV160TM. |
| vendest |
Posted - 01/25/2017 : 02:10:13
quote:
Originally posted by ZLM
Try on new chips. Brand new chip never in a locked state.
Thanks for the information about new chip.
I have tried a bunch of new chips but still having the same issue.
Even tried 2 different SOP44/DIP40 adapters.
The chip is recognized properly but the data programmed passes thru.
I've been using this programmer to burn regular Eprom mainly with no problem. I |
| ZLM |
Posted - 01/22/2017 : 18:36:28
Try on new chips. Brand new chip never in a locked state. |
| vendest |
Posted - 01/15/2017 : 15:39:22
Hi guys, I'm new here.
Bumping on this old thread as I'm having a similar issue
Trying to program a MX29LV160TM with TOP 3100.
The program seems to be writing upon verifying the chip is still blank.
Understand from above that the eeprom could be locked/protected. Is there a way to unlock the chip from topwin7?
Thanks,
Jerome |
| ZLM |
Posted - 05/01/2012 : 20:14:40
Not sure the FlashPRo 400+. I am only know the GQ-4X. On GQ-4X, there is a unlock feature, it can unlock whole chip. |
| ZLM |
Posted - 04/20/2012 : 23:01:18
if blankcheck failed, then the erase is fail.
If the chip is locked, then you need to unloack the chip before write it. |
