T O P I C R E V I E W |
eduardo48 |
Posted - 03/12/2018 : 09:06:59 Support, you can verify, bad block detection, compare with another programmer I have different result, example gq5x 1293, 1373, 1542, rt809h 1292, 1372, 1541. If there is an error, it could bring problems in smart copy |
8 L A T E S T R E P L I E S (Newest First) |
eduardo48 |
Posted - 03/15/2018 : 07:04:31 quote: Originally posted by GQ5XSupport
There could be one off in report but smart copy does the right thing.
Thank you for responding, I would be calmer if the value informed by the software was correct. I think you should correctly report the defective block |
GQ5XSupport |
Posted - 03/14/2018 : 12:43:52 There could be one off in report but smart copy does the right thing. |
eduardo48 |
Posted - 03/13/2018 : 09:23:23 quote: Originally posted by anniel
quote: Originally posted by eduardo48
quote: Originally posted by anniel
quote: Originally posted by eduardo48
They have to be numbered in the same way, if the software incorrectly numbers the blocks, using smart copy can skip a good block. For this I consult support if you can verify this.
Maybe some start counting at 0 and others start at 1...
Hello anniel,you are sure of what you tell me, you can check this, please read the link, where we had a flaw with this problem http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8292 reply 38
GQ5XSupport would need to look into this.
You say, that consult support, as I do |
anniel |
Posted - 03/13/2018 : 07:36:41 quote: Originally posted by eduardo48
quote: Originally posted by anniel
quote: Originally posted by eduardo48
They have to be numbered in the same way, if the software incorrectly numbers the blocks, using smart copy can skip a good block. For this I consult support if you can verify this.
Maybe some start counting at 0 and others start at 1...
Hello anniel,you are sure of what you tell me, you can check this, please read the link, where we had a flaw with this problem http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8292 reply 38
GQ5XSupport would need to look into this. |
eduardo48 |
Posted - 03/13/2018 : 06:01:57 quote: Originally posted by anniel
quote: Originally posted by eduardo48
They have to be numbered in the same way, if the software incorrectly numbers the blocks, using smart copy can skip a good block. For this I consult support if you can verify this.
Maybe some start counting at 0 and others start at 1...
Hello anniel,you are sure of what you tell me, you can check this, please read the link, where we had a flaw with this problem http://www.mcumall.com/forum/topic.asp?TOPIC_ID=8292 reply 38 |
anniel |
Posted - 03/13/2018 : 03:05:54 quote: Originally posted by eduardo48
They have to be numbered in the same way, if the software incorrectly numbers the blocks, using smart copy can skip a good block. For this I consult support if you can verify this.
Maybe some start counting at 0 and others start at 1... |
eduardo48 |
Posted - 03/12/2018 : 19:04:03 They have to be numbered in the same way, if the software incorrectly numbers the blocks, using smart copy can skip a good block. For this I consult support if you can verify this. |
anniel |
Posted - 03/12/2018 : 16:44:42 quote: Originally posted by eduardo48
Support, you can verify, bad block detection, compare with another programmer I have different result, example gq5x 1293, 1373, 1542, rt809h 1292, 1372, 1541. If there is an error, it could bring problems in smart copy
Depends if they are not numbered the same or miss-identified. |
|
|