Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W
EnsignRickyTO
Posted - 07/06/2007 : 15:42:19 I am trying to program a D8751H using the Dual Power Willem Universal Programmer. I have the MCS-51 adapter board installed on the programmer and the 12V power adapter connected. I can blank check the chip and read the buffer but as soon as I try and program it the software throughs the following error message: Error at 0x0000000 Chip = 0xFF Buffer = 0x80
Can someone please advise?
Thanks Greg
1 L A T E S T R E P L I E S (Newest First)
ZLM
Posted - 07/07/2007 : 12:32:08 Check the chip's ID. You should be able to get correct ID.