T O P I C R E V I E W |
Anatoli Panchenko |
Posted - 11/16/2007 : 10:39:13 Hi, I have PRG-026 USB AVR DebugWIRE ICE+AVRISP MKII. AVR Studio detecting it as JTAGICE MkII, and don`t allowing me to select Atmega8 from dropdown meniu (I don`t see Atmega8 here). Itryed to flash programmer from DebugWIRE+JTAG MKII ISP programmer\update_Firmware folder, but problem is still. Any help or ideas are welcome. |
4 L A T E S T R E P L I E S (Newest First) |
Anatoli Panchenko |
Posted - 11/24/2007 : 22:54:07 Thank you for help ZLM. Yes, it seems to be that M8 can be programed as M88 . I`m not tested it for eprom read/write, but flash read/write is working good. |
ZLM |
Posted - 11/22/2007 : 14:38:44 Tried on Atmega8. It is not in the device list. HoweverI succefully programmed it by select Atmega88.
But the fuse bit name you need to check the datasheet to do a conversion.
The description is revised. |
Anatoli Panchenko |
Posted - 11/22/2007 : 11:42:08 Hi ZLM, At Atmel.com I saw that JTAG can`t to program mega8. But in MCUmall description of AVR DebugWIRE ICE+AVRISP MKII (actually it shold to be DebugWIRE ICE+JTAG MK2) was writed that it yes can do it... |
ZLM |
Posted - 11/19/2007 : 09:17:10 I will try today later. |