| T O P I C R E V I E W |
| Lord_Anubis |
Posted - 11/06/2005 : 15:24:18
I just purchased a MCS-51+Adapter & Enhanced Willem EPROM Programmer ATMEL with the hopes of reprogramming motherboard bios chips. I cannot find this chip (W49F002UP70B) in the device listing, have tried W49V002A & W49V002FA without success. There are no other WINBOND device listings that I can see. I know it is a W49002U 32pin PLCC 2 megabit, 5 volt CMOS flash memory (http://www.alldatasheet.com/datasheet-pdf/pdf/47674/WINBOND/W49F002UP70B.html).
So my question is, is the programmer I purchased compatible? Am I doing something wrong? When I try reading the red light comes on and for hardware id I get 0x4, 0x4, Fujitsu. Writing and verify both fail instantly.
Any help would be appreciated, thanks. |
| 4 L A T E S T R E P L I E S (Newest First) |
| Lord_Anubis |
Posted - 11/08/2005 : 17:56:50
awesome that worked perfectly, I never would have guessed selecting device AT49F002 would work but it did. Thanks so much. |
| backbiter17 |
Posted - 11/08/2005 : 12:01:34
why dont you try same other brands?
br, ales |
| Lord_Anubis |
Posted - 11/08/2005 : 07:22:04
I understand what you are saying (about using fhw/lpc socket to program), only thing is I cannot locate my chip in the program. Take a look at the pic and you will see what I mean. If I am looking in the wrong spot please tell me so I can find the error in my ways. Thanks for any and all help.
[URL=http://img175.imageshack.us/my.php?image=question1zx.jpg] [/URL] |
| backbiter17 |
Posted - 11/07/2005 : 06:13:41
this chip is located under Firmware HUB/LPC
you shod use fhw/lpc socket to ptogram this device
br, ales |
