T O P I C R E V I E W |
goukizero |
Posted - 12/10/2009 : 17:06:00 Hello
I just bought an enhanced willem with the 16bit 40-42 dip adapter, it has not extra power supply plug, it just has USB and Parallel port input.
I can read all (27c1024, 27c160, 27c800, 27c000) eproms ok, but i can't write any of them. I ever have the same error : 0x000000 chip = 0xff or 0x00 and buffer 0x00 or 0xff It depends about the bin file i want to use.
Well, I used all the combinations i could do with the wires, the programmer, the adapter. I ever get an error.
I can read all of them, so I suppose the Willem works...
I'm really desperated.
If you can help me, please !!!
|
2 L A T E S T R E P L I E S (Newest First) |
simeon |
Posted - 01/23/2010 : 07:05:50 you can still use it by adding a small jumper between the vcc pin 32 and 28 on there tracks when you want to program you can add 6.250 here from a small supply of 9vdc and using a three pin voltage regulator 5.1v and add some diodes to its ground pin to raise its voltage output to 6.2 {ie two diodes for 1.2v}{this is aok for reading also}
|
ZLM |
Posted - 12/15/2009 : 09:42:55 Use a 9v or 12v external power adapter to see if it works. |
|
|