| T O P I C R E V I E W |
| azure |
Posted - 03/19/2010 : 13:26:34
Hi I am having problems trying to write to my pic18F2525 chip.
I have connected my chip via ICSP to the appropriate pins on the chip.
I select the pic with in the programmer and load the Hex file I'm trying to write.
When I try to write to the chip I get the error
Error Program Memory at 0x000000
Any help would be Appreciated
Cheers
|
| 5 L A T E S T R E P L I E S (Newest First) |
| ZLM |
Posted - 03/26/2010 : 10:55:29
Try IC-Prog Software. that works with this programmer. |
| azure |
Posted - 03/25/2010 : 03:36:50
quote:
Originally posted by ZLM
That maybe software bug.
Ok, I am running the latest software that came with the programmer and I can find no newer versions online.
Is there any other software compatible with the Willem pcb50 programmer? or do I need to go buy a new programmer..
|
| ZLM |
Posted - 03/24/2010 : 20:46:16
That maybe software bug. |
| azure |
Posted - 03/20/2010 : 10:26:13
Still no luck.
First I clear the chip
Status: "CHK Blank Code OK (no Checksum CFG)"
Next I select program the chip the software says
"Programming Code (0x6000) Word"
This reaches 100%
It then says "Programming EEPROM (0x400) byte"
This reaches about 60% and fails with a status of "Error Program memory at 0x000000"
quote:
Originally posted by ZLM
chip need to be erased before write. Do blank check before write.
|
| ZLM |
Posted - 03/19/2010 : 16:52:46
chip need to be erased before write. Do blank check before write. |
