| T O P I C R E V I E W |
| ECruzchip |
Posted - 04/12/2010 : 15:21:05
Hi Folks,
I'm newbie to this forum group.
I have a PCB which already have an TSOP chip made by
Spansion. It's a 32 MB of memory.
I was told by someone in order to get a new TSOP chip,
is to find S29GL032N90 chip to replace it.
Or is there anyway that I could re-write on the same
memory chip that's already on the PCB??
What tools and software would I need to re-program
the same TSOP chip on the PCB???
Would I need to have a cable jumber?? Like J3??
Would I need
--ADP-003/3102 TSOP48 8/16 bit adapter V2.0
--jumper J3
--017E device ID, manufacture AMD
--GQ USB series programmer SW?????
Would I need to have a new BIOS to re-write on that chip??
I wish that I could include image of the PCB with
a TSOP chip on it. But I have no other ways to insert photo
to show you.
Hope this helps with answers.
Thank you,
|
| 1 L A T E S T R E P L I E S (Newest First) |
| ZLM |
Posted - 04/13/2010 : 09:45:14
Most of cases you have remove the TSOP48 chip from your PCB and then program it from a programmer.
You need a TSOP48 adaper to program it on a programmer.
Once of the programmer and the adapter can be: GQ-4X and ADP-003. |
|
|
