T O P I C R E V I E W |
ailgup |
Posted - 05/12/2010 : 15:29:29 Okay i am new to this and i plugged the programmer into the computer and both LED's went on then when i placed in the pic with 3 rows left to the back and 10 to the front the green led goes off and only the red one is on. Then when i go to program it using the .hex file i get this error :ERROR->writing address 0x000000 Written:0x0000 Read:0x3FFF when ti tries to program the red led blinks a little. I think that i have the settings right in Winpic800 i selected the right hardware and it says that it sees the programmer so i don't know what i'm doing wrong? chris |
2 L A T E S T R E P L I E S (Newest First) |
ZLM |
Posted - 05/15/2010 : 00:13:00 How do you know the reading is woking good? Does the software can detect the chip? |
ailgup |
Posted - 05/12/2010 : 17:12:13 i can read the chip but when i try to erase it ,gives me an error, there is data on the chip so it needs to be removed first. |