T O P I C R E V I E W |
ZLM |
Posted - 09/12/2006 : 00:27:31 The jumpers JP1-JP2 for reading/writting and Erase the SST27SF512 on Dual power programmer are different.
When doing read/write, the JP1-JP2 should be:
3.82 KB
When doing erase, the JP1-JP2 should be:
3.83 KB |
4 L A T E S T R E P L I E S (Newest First) |
ZLM |
Posted - 05/16/2007 : 21:00:28 Yes. |
Chezedik |
Posted - 03/08/2007 : 13:49:10 Is black where the jumper is? |
ZLM |
Posted - 09/15/2006 : 11:11:05 Please provide exact error message when write error. Also,remove the chip and check the Vpp if it is around 12.5V in the Test H/W page. |
starchland |
Posted - 09/14/2006 : 15:10:29 still getting error message. When i try to erase it says setting jumper for w27e, Can only read, cant write, erase or anything. fails blank check.what else can i do to get this working?
Torontoaccords.com |