MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 S29GL064 and GX-4X

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List Spell Checker
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

   Insert an Image File
Check here to include your profile signature.
    

T O P I C    R E V I E W
nihonsx5 Posted - 02/21/2014 : 15:41:40
Hi,

I received S29GL064N90TFI040 chips. With GQ-4X, I can erase, read the chip but I can't write to it. I always have an error (in the beginning of writing). See picture attached.

I have the adapter ADP-072 + ADP-077.
I configure J4 on "ON", J2 on "29F", and J1 on "5V". I tried with a few chips, same results...

I tried with 6.25, 6.26 and 6.27 software versions, different speed, and with/without Temp Unprotect.

When It failed, I tried to read the chip, and there are informations until offset 3FFF.

Any Ideas ?

Thank you.

Image Insert:

2.79 KB
3   L A T E S T    R E P L I E S    (Newest First)
ZLM Posted - 02/25/2014 : 21:39:11
Good to know that.
nihonsx5 Posted - 02/22/2014 : 00:35:09
I checked all pins on the ADP077 and I redid the welds. For now, it seems to work (burning 30%).
Adapters are not tested before being sold ?


Edit : 100% write + verify OK.
ZLM Posted - 02/21/2014 : 23:54:22
It seems you have pin contact problems on A13. Check that pin.

Also, make sure you have set jumper correctly on ADP-003.

MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.05 sec. Snitz Forums 2000