T O P I C R E V I E W |
geoanas |
Posted - 03/01/2014 : 21:44:50 Hi I have a GQ-4X programmer and software ver.6.29 installed on my computer. I tried to program some PIC12F629 chips and despite all my efforts every single one fails on verification process. What shall I do ?
|
5 L A T E S T R E P L I E S (Newest First) |
ZLM |
Posted - 03/06/2014 : 19:31:31 It is looks OK.
Try to read the chip and see hat is the CFG value you got. If you got 3FFF CFG value, then the chip should be programmed correctly. There is a software bug here. |
geoanas |
Posted - 03/04/2014 : 08:22:44 Ok ! First one shows the error message and the latter is the configuration TAB after Verification Failure
Image Insert:
107.2 KB
Image Insert:
81.76 KB |
ZLM |
Posted - 03/03/2014 : 14:55:13 I think your configuration word has a wrong data.
Can you do a screen copy and paste here for the configuration words tab?
The chip should be OK. |
geoanas |
Posted - 03/03/2014 : 13:44:07 Yes I can get the chip's ID correctly When I erase the chip, it passes the blank check. When verification process starts, I always get an error with "Configuration VerifyFailed". Seems that problem is on PIC's Configuration.... |
ZLM |
Posted - 03/02/2014 : 11:43:14 Can you get chip ID correctly? Did you erased the chip and passed the blank check? What is your exac error message? |