T O P I C R E V I E W |
automagic |
Posted - 02/19/2010 : 20:46:51 I have a problem with programming a AMD AM29F200BB out of a car ECU Siemens Sirius 32(D) S110030306 From a 1.4 petrol Renault Kangoo year 2000 that needs imob removed. I have a GQ-4X with PSOP44-DIP adapter V3 and also PSOP44 solder type. The chip ID will not come up on either of them. When the chip was removed it was covered in Varnish which was giving problems with connection on DIP Adapter. So used soldered type instead still not correct ID but will read and verify. Can someone explain the jumpers when using PSOP44 in GQ-4X please and any other help most appreciated. I have inc picture.
Image Insert:
91.61 KB |
7 L A T E S T R E P L I E S (Newest First) |
ricampr |
Posted - 03/10/2010 : 05:23:49 I think I wrote a File by mistake in eeprom, so now you can read the file correctly. correct file deleted. am new to this job thanks |
ZLM |
Posted - 03/08/2010 : 18:27:35 The adapter and its position are correct.
How do you know the reading is incorrect?
|
ricampr |
Posted - 03/06/2010 : 05:23:52 ADP-032 SOIC16 SOP16 ZIF adaptador http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=3203 usar esse adaptador. [URL = http://img442.imageshack.us/i/img1205a.jpg/] [IMG] http://img442.imageshack.us/img442/7888/img1205a.jpg [/ IMG] [/ URL] |
ZLM |
Posted - 03/06/2010 : 01:18:12 Do you use any adapter? How do you place the chip on the programmer? |
ricampr |
Posted - 03/05/2010 : 11:39:34 I have an eeprom ST95160 and I can read the chip, but the reading istn't correct, what can be the problem? GQ-3X programmer |
ricampr |
Posted - 03/04/2010 : 17:05:11 hello I am reading eeprom ST 95160th that placed a megane airbag ECU. but not to read this right. what's wrong? be the read speed? how many times can be read this eeprom? I'm new at this, ha any tips? thanks |
ZLM |
Posted - 02/22/2010 : 00:17:36 http://www.mcumall.com/forum/topic.asp?TOPIC_ID=2566 |