MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-4X and Motorola TMS2716C

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List Spell Checker
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

   Insert an Image File
Check here to include your profile signature.
    

T O P I C    R E V I E W
stangbat Posted - 01/03/2012 : 17:10:13
Will the GQ-4X program a Motorola TMS2716C? The datasheet is here, although the C version is not specifically mentioned:
www.datasheetarchive.com/dl/Datasheets-110/DSAP0010008.pdf

I've tried the generic 2716B at different speeds but it always stops at 9%. I'm hesitant to try the 21v or 25v VPP devices because I don't want to damage the EPROM. Any tips are appreciated.
2   L A T E S T    R E P L I E S    (Newest First)
grantb5 Posted - 07/11/2015 : 14:14:21
Any thought to adding it to the device list with a Message= to indicate DEVICE NOT SUPPORTED?

Or add an unsupporteddevices.txt. I dunno, just something to save us some time and hair pulling. Spent quite a few hours on this before I realized it was a triple supply issue. Had a variety of 2716s and it took a while to see that pattern of the ones that would always fail.
ZLM Posted - 01/03/2012 : 23:34:37
The GQ-4X does not supports TMS2716C. The TMS2716C needs a +/-5 dual power.

2716B should be OK. Erase the EPROM a bit longer and see if it works. Try to write multiple times if the first try fail.

The chip problem will let programming fail too.

I do not recommand your to try 21V, 25V VPP. The 2716B is 12.7V indeed.

MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.05 sec. Snitz Forums 2000