All Forums  MCUmall Forums  Novice Place  help with 5.0e willem eprom programmer

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize: 640 x 480 800 x 600 1024 x 768 1280 x 1024 UserName: Password: Format Mode: Basic  Help  Prompt  Format: Font Andale Mono Arial Arial Black Book Antiqua Century Gothic Comic Sans MS Courier New Georgia Impact Lucida Console Script MT Bold Stencil Tahoma Times New Roman Trebuchet MS Verdana   Size 1 2 3 4 5 6   Color Black Red Yellow Pink Green Orange Purple Blue Beige Brown Teal Navy Maroon LimeGreen Message: * HTML is OFF * Forum Code is ON Smilies [quote][i]Originally posted by tel[/i] [br]Help I have just brought a Willem EPROM Bios programmer, the PCB5.0E board. Can anyone please help me, I have installed the latest software v 0.98D11, and I have a 12 volt power supply on instead of the usb power lead. I have windows XP with sp3, the board test OK when I test it with the soft ware. I am trying to reprogram an Intel N82802AB bios chip; I have set the 12 dip switches as follows, 1 OFF 2&3 ON 4 OFF 5&6 ON 7 OFF 8 ON 9 OFF 10 ON 11 OFF AND 12 ON. as indicated by the soft ware, I then put the chip in to the FWH/LPC socket on the board, I can then read the Intel chip and I can read the ID on the chip, but when I try to blank the chip the percentage bar comes up the bar then fills up with blue indicating that it as erase but the% stays on 0 and nothing happens, the red light is on, also I have tried to just programme the chip with no lack. I need to find out if it’s me or if I have a faulty board. Below is a image of my board. Tanking you Terry Wade [b]Image Insert:[/b][br][img]http://www.mcumall.com/forum/uploaded/tel/201093032347_2009SMD.jpg[/img][br][size=1] 106.13 KB[/size=1] [/quote]    Insert an Image File Check here to include your profile signature.