| T O P I C R E V I E W |
| BabyScientist |
Posted - 03/12/2011 : 11:24:20
How do I get the checksum after reading a chip? I don't see any option for this. |
| 3 L A T E S T R E P L I E S (Newest First) |
| ZLM |
Posted - 03/18/2011 : 11:04:48
GQUSB uses standard checksum calculation.
The displayed checksum is the acture checksum from chip.
If the duplicated chip is working fine, then the checksum should be fine. |
| BabyScientist |
Posted - 03/16/2011 : 10:52:49
OOps I am using a very small netbook screen I did not see the checksum on the bottom of the GQUSB terminal!
Now another question---checksum for this chip in GQUSB shows 000FF856, it is supposed to be E4F6... Checksums for all other chips also do not match. But chips work ok. I think it is reading wrong--can you advise? How can I verify checksums correctly? |
| BabyScientist |
Posted - 03/16/2011 : 09:38:00
For example I am told the checksum for the chip is supposed to be E4F6 ... How do I see the checksum after reading to make sure it is E4F6? |
