MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 How to read microchip 12C508A
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

provato

2 Posts

Posted - 11/11/2019 :  09:34:49  Show Profile  Reply with Quote
Hi!
I have a GQ-4x4 usb programmer and I have used it succesfully in the past to dump and write different ICs.
I also have a playstation modchip with 12C508A written on it, that I want to dump its data to a bin file.
First of all I can't find the chip on the device list so I choose the closest one "12F508A".
Still I cannot read its contents - every time it shows different data on the buffer. I have confirmed that the chip is in the correct position (pin 1 of the chip on pin 12 of the programmer)

Is this IC (12c508a) compatible with the gq-4x4 device?
Is there something I am doing wrong and I cannot read its contents?

thank you
Reply #1

provato

2 Posts

Posted - 11/14/2019 :  23:37:20  Show Profile  Reply with Quote
I think I figured it out, but I'm not sure I did it the right way.
I found a reference of the 12c508a inside "devices.txt" file, and I added it to the supported list below (removed the ";" in front of the sentence)
I was then able to see the "12c508a" under the supported devices list when I opened the programmer's GUI, and dumped its contents successfully.
Is this the correct way to read this chip?
Go to Top of Page
Reply #2

anniel

2529 Posts

Posted - 11/15/2019 :  05:38:07  Show Profile  Reply with Quote
quote:
Originally posted by provato

I think I figured it out, but I'm not sure I did it the right way.
I found a reference of the 12c508a inside "devices.txt" file, and I added it to the supported list below (removed the ";" in front of the sentence)
I was then able to see the "12c508a" under the supported devices list when I opened the programmer's GUI, and dumped its contents successfully.
Is this the correct way to read this chip?

It seems it was commented out of the devices.txt.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.13 sec. Snitz Forums 2000