MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X, GQ-3X, GQ-4X)
 SPI chips Recognized Problem
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

jobegod

Greece
1 Posts

Posted - 07/11/2020 :  23:34:12  Show Profile  Reply with Quote
Hello

I try to read many SPI chips (SST25LF040, SST25VF032B, MX25L1605, MX25L3205) with my GQ-4X Re.1.30 SW Re.6.38. All chips are soldered on motherboard.I connect chips with test clip SOIC8.The motherboards without power.Only SST25LF040 recognized with correct ID.All other chips not recognized with ID 000000.
I have ADP-056 module. It has SPI connector with same pinout with chips but the SW Re.6.38 show to use ADP-081 module. Why happened this? Module ADP-081 is one by one pinout converter. I try to use ADP-056 with test clip SOIC8 but again GQ-4X not recognized chips with ID 000000.
Any idea why happen this?
Thank you
Reply #1

anniel

2529 Posts

Posted - 07/13/2020 :  18:34:43  Show Profile  Reply with Quote
quote:
Originally posted by jobegod

Hello

I try to read many SPI chips (SST25LF040, SST25VF032B, MX25L1605, MX25L3205) with my GQ-4X Re.1.30 SW Re.6.38. All chips are soldered on motherboard.I connect chips with test clip SOIC8.The motherboards without power.Only SST25LF040 recognized with correct ID.All other chips not recognized with ID 000000.
I have ADP-056 module. It has SPI connector with same pinout with chips but the SW Re.6.38 show to use ADP-081 module. Why happened this? Module ADP-081 is one by one pinout converter. I try to use ADP-056 with test clip SOIC8 but again GQ-4X not recognized chips with ID 000000.
Any idea why happen this?
Thank you

Try with power to the board.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.17 sec. Snitz Forums 2000