MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 What adapter do i need please :)
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

scrappysphinx

United Kingdom
25 Posts

Posted - 05/17/2022 :  11:39:14  Show Profile  Reply with Quote
Hi all, i have some of the flash chips that i need to erase and program. I have 5 with the 29F400 chip and 5 with 29F800 in tsop48 package. The end goal is for them to be used as Kickstart chips in the amiga, which usually uses the 27C400 eprom however i don't know what adapter i need to erase and program them. I have seen there is a tsop adapter but that would mean i would need to desolder the tsop each time i needed to program them. I have found a few articles explaining how to program them with the TL866 programmer but hoping someone can advise me on how i can use them with the GQ4X4 i have?

Here is the info on how to program them with the TL866 if that helps

https://shred.zone/cilla/page/467/flash-amiga-rom.html?fbclid=IwAR2hWWa0sDh7urZO_YvMAlj-6dvfEh1FQ1CubkDigFu7Z7oCFtWgo-2oLww

Google Drive link for pic cause attachments don't seem to be working.

https://drive.google.com/file/d/1LW5kEjy329ou3Jx73hG1-7Dt7VFAnK8f/view?usp=sharing
Reply #1

anniel

2529 Posts

Posted - 05/19/2022 :  02:59:56  Show Profile  Reply with Quote
quote:
Originally posted by scrappysphinx

Hi all, i have some of the flash chips that i need to erase and program. I have 5 with the 29F400 chip and 5 with 29F800 in tsop48 package. The end goal is for them to be used as Kickstart chips in the amiga, which usually uses the 27C400 eprom however i don't know what adapter i need to erase and program them. I have seen there is a tsop adapter but that would mean i would need to desolder the tsop each time i needed to program them. I have found a few articles explaining how to program them with the TL866 programmer but hoping someone can advise me on how i can use them with the GQ4X4 i have?

Here is the info on how to program them with the TL866 if that helps

https://shred.zone/cilla/page/467/flash-amiga-rom.html?fbclid=IwAR2hWWa0sDh7urZO_YvMAlj-6dvfEh1FQ1CubkDigFu7Z7oCFtWgo-2oLww

Google Drive link for pic cause attachments don't seem to be working.

https://drive.google.com/file/d/1LW5kEjy329ou3Jx73hG1-7Dt7VFAnK8f/view?usp=sharing

Use a clip if you don't want to unsolder the chips.


www.deltadesign.us/files/48_pin_tsop_type_I_clip.JPG
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000