MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 Intel N28F001 PLCC Chip Help
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

mbergeron119

USA
9 Posts

Posted - 09/03/2022 :  17:24:38  Show Profile  Reply with Quote
Hello does anyone know where I can obtain help or download files to be able to read this particular chip. In my GQ-4X4 I do not have this chip listed. I only have N28F010 and N28F020. I have tried to read it to no avail.

Edited by - mbergeron119 on 09/03/2022 19:12:15
Reply #1

mbergeron119

USA
9 Posts

Posted - 09/03/2022 :  19:11:19  Show Profile  Reply with Quote
Can I use the N28F010 to read N28F001 PLCC chips? I tried reading a N28F001 with N28F010 and as I said it didn't read anything. A friend mentioned there may be a difference between 512 and 1024.. Anyone have any tips or help for me?? I could possibly have the wrong adapter. They sent me one that says PLCC32-EP1M on the bottom of the adapter opposed to PLCC32 TO DIP32
Go to Top of Page
Reply #2

mbergeron119

USA
9 Posts

Posted - 09/04/2022 :  03:07:15  Show Profile  Reply with Quote
I also have another question... the orientation of the adapter.. The photo in the programmer shows the adapter at the bottom of the ZIFF socket and not plugged in at the top starting at pin 1. ??? I'm so confused...
Go to Top of Page
Reply #3

anniel

2531 Posts

Posted - 09/04/2022 :  15:27:31  Show Profile  Reply with Quote
quote:
Originally posted by mbergeron119

Hello does anyone know where I can obtain help or download files to be able to read this particular chip. In my GQ-4X4 I do not have this chip listed. I only have N28F010 and N28F020. I have tried to read it to no avail.

Datasheets is a good place to start.
Go to Top of Page
Reply #4

anniel

2531 Posts

Posted - 09/04/2022 :  15:27:41  Show Profile  Reply with Quote
quote:
Originally posted by mbergeron119

Can I use the N28F010 to read N28F001 PLCC chips? I tried reading a N28F001 with N28F010 and as I said it didn't read anything. A friend mentioned there may be a difference between 512 and 1024.. Anyone have any tips or help for me?? I could possibly have the wrong adapter. They sent me one that says PLCC32-EP1M on the bottom of the adapter opposed to PLCC32 TO DIP32

Who sent you the adapter?
Go to Top of Page
Reply #5

anniel

2531 Posts

Posted - 09/04/2022 :  15:27:54  Show Profile  Reply with Quote
quote:
Originally posted by mbergeron119

I also have another question... the orientation of the adapter.. The photo in the programmer shows the adapter at the bottom of the ZIFF socket and not plugged in at the top starting at pin 1. ??? I'm so confused...

Follow the instructions.
Go to Top of Page
Reply #6

mbergeron119

USA
9 Posts

Posted - 09/07/2022 :  13:20:03  Show Profile  Reply with Quote
My apologies.... I found the correct orientation. I'm sorry if I sound uneducated about the chip that's why I came here. I do have it properly in the socket now with the correct adapter. Still unable to read it. I cannot find the chip file for this Intel N28F001. There is a N28F010*PLCC32 but that one does not work unfortunately.

quote:
Originally posted by anniel

quote:
Originally posted by mbergeron119

I also have another question... the orientation of the adapter.. The photo in the programmer shows the adapter at the bottom of the ZIFF socket and not plugged in at the top starting at pin 1. ??? I'm so confused...

Follow the instructions.

Go to Top of Page
Reply #7

mbergeron119

USA
9 Posts

Posted - 09/07/2022 :  13:22:43  Show Profile  Reply with Quote
Sorry I thought you were asking about the programmer.. The adapter actually is one I had from stuff I had. I used to use a Willem reader but it's been years and I am used to regular EEPROMS... not these PLCC Flash Chips.

quote:
Originally posted by anniel

quote:
Originally posted by mbergeron119

Can I use the N28F010 to read N28F001 PLCC chips? I tried reading a N28F001 with N28F010 and as I said it didn't read anything. A friend mentioned there may be a difference between 512 and 1024.. Anyone have any tips or help for me?? I could possibly have the wrong adapter. They sent me one that says PLCC32-EP1M on the bottom of the adapter opposed to PLCC32 TO DIP32

Who sent you the adapter?


Edited by - mbergeron119 on 09/07/2022 13:24:42
Go to Top of Page
Reply #8

mbergeron119

USA
9 Posts

Posted - 09/07/2022 :  13:51:50  Show Profile  Reply with Quote
I think I found what I need.. I see a 4.7 resistor is required for this chip on the adapter board, and also a pin cut. So I did that and I have the chip and the adapter configured properly according to the photo from the device log.

I just cannot locate the "PLCC" device in the GQ-4X4 programmer. I can find a regular 32 pin chip device.. I cannot find 28F001BX-T*PLCC32

Edited by - mbergeron119 on 09/07/2022 14:24:55
Go to Top of Page
Reply #9

mbergeron119

USA
9 Posts

Posted - 09/07/2022 :  14:30:22  Show Profile  Reply with Quote
I got it.. sorry everyone! The regular 28F001BX-T worked fine.. I just needed to restart the program and programmer.. sorry for the bother.
Go to Top of Page
Reply #10

anniel

2531 Posts

Posted - 09/08/2022 :  06:30:40  Show Profile  Reply with Quote
quote:
Originally posted by mbergeron119

I think I found what I need.. I see a 4.7 resistor is required for this chip on the adapter board, and also a pin cut. So I did that and I have the chip and the adapter configured properly according to the photo from the device log.

I just cannot locate the "PLCC" device in the GQ-4X4 programmer. I can find a regular 32 pin chip device.. I cannot find 28F001BX-T*PLCC32

Where did you found the info? Could be useful to someone else.
Go to Top of Page
Reply #11

anniel

2531 Posts

Posted - 09/08/2022 :  06:32:37  Show Profile  Reply with Quote
quote:
Originally posted by mbergeron119

I got it.. sorry everyone! The regular 28F001BX-T worked fine.. I just needed to restart the program and programmer.. sorry for the bother.

No sweat. So it works with the modified adapter?
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.1 sec. Snitz Forums 2000