MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X, GQ-3X, GQ-4X)
 GQ-4X hw:1.10 Gqusbprg 6.38, M35080VP		  New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

DoZe

France
2 Posts
Posted - 11/12/2020 :  03:17:42  Show Profile  Reply with Quote
Hi all

I just want to know if finally someone have succesfully write without ANY problems M35080VP

GQ-4X : Hw 1.10
gqprgusb : 6.38
Driver : 2.01 signed
Good adapter of course.


1) No problem to Read M35080VP perfectly
2) No problem to Blank with "FF FF FF", write, verify = Perfect.

But when i want to put anything in the Offset 00000000 or 00000010 other than "FF FF FF"

it's impossible !!! As astonishing as it may seem, the rest is 100% perfect.

Like the programmer have jumped the 2 first Offset.

I've seen the 6.37 have some problem with M35080VP but it seems solved with the 6.38.

Any ideas....... ?

Regards



Reply #1

DoZe

France
2 Posts
Posted - 11/13/2020 :  11:58:33  Show Profile  Reply with Quote
Hi.

I omit to precise i know if M35080VP Offset 00000000 & 000000010 are not "zeroied", the chip is not empty. The Two offset correspond to 16bit incremental register.

Result : GQ-4X WITH GqprgUSB is not capable to BLANK correctly the M35080VP

Try with an entirely new chip: NO problem to read :

000000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Write my File in a NEW chip, verify : NO Problem
Edited by - DoZe on 11/13/2020 12:00:10
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.16 sec. Snitz Forums 2000