MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 Programming 2532
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

jroesner

Canada
10 Posts

Posted - 11/13/2005 :  09:46:36  Show Profile  Reply with Quote
Does anyone have a voltage hack, to program 2532.

I have made a socket adapter to change the pins, but I understand I need a higher voltage.

Any help in programming these is greatly appreciated.

John
Reply #1

ZLM

2926 Posts

Posted - 11/14/2005 :  19:10:51  Show Profile  Reply with Quote
If I'm not wrong, the 2532 uses 25V Vpp. The Willem programmer is able to provide this Vpp.
Go to Top of Page
Reply #2

DL

USA
46 Posts

Posted - 12/02/2005 :  15:53:02  Show Profile  Reply with Quote
Hi John,

No Willem-based programmers to date can handle the currents drawn by NMOS EPROMs. If you're using the enhanced board, it doesn't support any DIP24 parts. Broken power routing to pin28 on the socket.

I have modified several programmers to fix the voltage drop problem. Additionally, you need to be careful about sufficient erase and program margin when programming any EPROMs.

HTH,
Dennis
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.23 sec. Snitz Forums 2000