|
Raptor
United Kingdom
1 Posts |
 Posted - 03/31/2009 : 06:03:50
|
Im new here so hello everyone 
I'm having problems writing to an AM29LV160DT-70SC Flash Chip. Im using a GQ-4X with a 'PSOP44-DIP Adaptor V2' with software 4.01. Every time I try to write to the chip it fails with the message:-
"Write failed, Address=0x000001, Buffer=0xE3 Device0xFF"
It doesnt manage to get the chips device ID either.
I have tried it with the AM29LV160BT/DT/MT device setting, and the AM29F160BT/DT device setting (Still keeping the PSOP44 adaptor set at 3V) and it still fails with the same message 
I have previously used the same GQ-4X and PSOP44 adaptor to write to AM29LV200BT-70SC flash chips with no problems.
Please could you tell me why I am having this problem? I'm guesing its something to do with the software? (At least I hope so!) If so how long would it take to fix? I only ask as this is for an important/urgent project.
Thanks in advance.
P.S. I also emailed mcumall support but then realised there was a forum afterwards, so please feel free to disregard my email and reply in this thread instead |
Edited by - Raptor on 03/31/2009 06:06:00
|
|
AM29LV160DT Write Failures on GQ-4X
