MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 Fail to program am29f040b or am29f010
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

nab0b

1 Posts

Posted - 01/18/2006 :  15:54:25  Show Profile  Reply with Quote
I have a dual power unit and using the USB to power the device. I am successful on erase and reads but fails on programming, I never fail on the same memory address and the average programming is between 2% and 13% (both am29f040 and am29f010).

I am also running it from a old Laptop, Could it be my power source (USB port on Laptop). If so what type of power supply should I be shopping for?
Reply #1

alsauto

5 Posts

Posted - 02/02/2006 :  07:29:40  Show Profile  Reply with Quote
have you had any luck programing the 29f040b I am having very simular problems and have not been able to program these chips as of yet with the dual powered programer.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.3 sec. Snitz Forums 2000