MCUmall EPROM BIOS Chip Burner Forum
Home
|
Profile
|
Register
|
Active Topics
|
Members
|
Search
|
FAQ
Username:
Password:
Save Password
Forgot your Password?
All Forums
MCUmall Forums
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
A simple clock as a first learning project
New Topic
Reply to Topic
Printer Friendly
Author
Topic
gregorymiller
USA
1 Posts
Posted - 11/06/2026 : 17:03:00
For a beginner clock project, would you start with a ready-made display module or wire the individual digits? A clock gives a child something familiar to compare with the numbers on the display.
Dad4Kids has
https://dad4kids.com/en/math-games-for-kids/telling-time-games/
for practising time on a screen. This is a learning resource, so it does not cover the electronics; I would welcome advice about a suitable first hardware project.
Edited by - gregorymiller on 11/06/2026 17:04:37
Topic
New Topic
Reply to Topic
Printer Friendly
Jump To:
Select Forum
MCUmall Forums
General Discuss
Novice Place
True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
GQ-5X
Automobile engine ECU, Immo, Air bag chip tunning
Using The Enhanced/Dual power Willem Programmer
Wellon/WEILEI USB Programmer
TOP USB Programmer
EasyPRO/SmartPRO USB Programmer
PIC Programmer
Using the AVR JTAG ICE and AVRISP ISP programmer
--------------------
Home
Active Topics
Frequently Asked Questions
Member Information
Search Page
MCUmall EPROM BIOS Chip Burner Forum
© Copyright 2003 - 2009 Mcumall Electronics Inc.
Generated in 0.1 sec.
Snitz Forums 2000
A simple clock as a first learning project
Posted - 11/06/2026 : 17:03:00
