MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 USB driver Re2.01, Error 1303 1310 , crash fix
 New Topic  Reply to Topic
 Printer Friendly
Author  Topic Next Topic  

Romance

2 Posts

Posted - 05/26/2009 :  23:34:37  Show Profile  Reply with Quote
My laptop has Windows Vista 32 Bit.
I tried to install GQUSBPrgRe4.01 on it but I got this error.

Image Insert:

45.72 KB

I installed GQUSBPrgRe3.03 but it couldn't detect CQ-4X. When I run this program it shows this error:

Image Insert:


9.6 KB


My laptop detects GQ-4X as "Pasco Xplorer Bootloader", but it doesn't work.

Are you sure that it works with Win Vista 32 Bit?
I tried to install Software V4.01 on another laptop, but it was the same situation and the same problem.

Edited by - Romance on 05/26/2009 23:56:32
Reply #1

hanso

Netherlands
7 Posts

Posted - 05/27/2009 :  09:04:26  Show Profile  Reply with Quote
The installer complains about not being run as admistrator, and is therefore refused access to that directory.

Perhaps you can fix it by logging in as administrator (prefered way) or by setting the permissions to that directory less restricted?

Hans

h**p://retro.hansotten.nl
Go to Top of Page
Reply #2

ZLM

2937 Posts

Posted - 05/27/2009 :  09:43:53  Show Profile  Reply with Quote
From Excalibre:

"Just need to right click on the setup file and run as admin, installs ok then."

Thanks to Excalibre.

(ZLM added on July-8-2010)
===========================================================
OR

The software Re.3.03 works on USB driver 1.0.

I think there is a USB driver conflict in you system.

You better to solve the driver problem frist.

update the driver to USB2.0 by clik on the update driver button in the device manager.

Step for updating the driver to 2.01:

You can download the RE2.01 driver from:

http://www.mcumall.com/download/TrueUSBWillem/USBDriverV2.0.1_32_64Bit.zip

1. In device manager, right click on the GQ-4X device item, which is the programmer with wrong driver loaded.
2. Select Properties->Driver->Update Driver
3. Direct the windows to the driver Re2.01 directory and select "GQwin64.inf".

==================================================================
==================================================================
For installation on the software, can you try to turn off the UAC from your vista?

steps:

1.Open up Control Panel, and type in "UAC" into the search box. You'll see a link for "Turn User Account Control (UAC) on or off":





2.On the next screen you should uncheck the box for Use User Account Control (UAC), and then click on the OK button.




Go to Top of Page
Reply #3

Romance

2 Posts

Posted - 05/27/2009 :  21:28:52  Show Profile  Reply with Quote
Thank you guys specially ZLM.

Your comments are very helpful.
Now it is working fine.
Whit this start up message:

H/W Re: GQ-4X Re-1.30
USB Driver Re.2.0
Software Re. 4.01


Go to Top of Page
Reply #4

Excalibre

United Kingdom
4 Posts

Posted - 02/19/2010 :  09:47:10  Show Profile  Reply with Quote
Just need to right click on the setup file and run as admin, installs ok then.

Easier than messing with user account controls.

Regards.
Liam.
Go to Top of Page
Reply #5

tom_ing

Denmark
5 Posts

Posted - 05/07/2010 :  07:58:20  Show Profile  Reply with Quote
Hi,

I just my GQ-4X programmer in the mail today, but when installing the USB driver v2 as described above my windoes does not detect the programmer....

I get the unknown USB device problem from Device manager and can not update the driver version.

I then use the application USBView and it's telling me the following.



Image Insert:

75.45 KB

How can i make my windows detect the GQ-4X programmer ?

Edited by - tom_ing on 05/07/2010 08:00:54
Go to Top of Page
Reply #6

ZLM

2937 Posts

Posted - 05/07/2010 :  08:43:30  Show Profile  Reply with Quote
Can you try it on another computer?
Did you used a USB hub?

Check the USB driver from Windows Device Manager first. see:


Image Insert:




For unknown device in the device manager, you need to Download and install the USB driver Re2.01 for GQ-4X OR Re3.00 for GQ-4X V4(GQ-4x4) via Update the driver:
see:


Image Insert:




Image Insert:





USB driver Re2.01 for GQ-4X OR Re3.00 for GQ-4X V4(GQ-4x4):





Image Insert:





Image Insert:





You should see this from software lower left:

7.17 KB
Go to Top of Page
Reply #7

tom_ing

Denmark
5 Posts

Posted - 05/07/2010 :  10:01:15  Show Profile  Reply with Quote
Hi,

Same issue on another pc..no HUB used.

Regards
Go to Top of Page
Reply #8

ZLM

2937 Posts

Posted - 05/31/2012 :  22:18:10  Show Profile  Reply with Quote
For those program crashed in Win 7, try Windows DEP setting:

http://www.mcumall.com/forum/topic.asp?TOPIC_ID=4712
Go to Top of Page
Reply #9

BradleyMcLean245

USA
1 Posts

Posted - 03/08/2024 :  22:44:39  Show Profile  Reply with Quote
nice nice

mali brown
Go to Top of Page
   Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000