I just receive new programmer. It looks Great. What driver is required by OS (XP) Why was driver not included? I follow instructions to install Software first, then connect programmer. Software doesn't read the switch configuration, I select new device and software tell me that Switch needs changed but not show me the switch configuration??? I try with either USB power only and with USB and external Power Supply? Programmer: RE GQ-2x RE 1.00 Software Release is RE 1.04 downloaded from MCU Mall. What is U2 & U10 ? How do I resolve problems?
Once you installed the software, the USB driver is installed too. No separated USB driver installation required if install the software before connect the programmer.
The DIP setting is not a problem. The software will not read the DIP switch. Each chip has different DIP switch setting and user need set the DIP setting. The message is only a reminder. You can ignor it if the DIP switch already been set. The DIP setting is showing in the software.
See example DIP setting in the software: 8.57 KB
No external Pwer Supply is needed. Unless you are using a unpowered USB hub.
U2 & U10 part number are the chip not been published yet.
programmer issues
Posted - 09/22/2006 : 09:52:56
