MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Willem PCB5.0c and ADP-054 Adapter - DIP40 27C1024
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

shas595

2 Posts

Posted - 12/01/2014 :  04:26:04  Show Profile  Reply with Quote
Hello all, glad to join!
I am trying to read and copy a 27C1024 EPROM.

I have used the Willem PCB5.0C many times before for 27C512 and 27C256 with no problem. I had to get the ADP-054 adapter to use 40 and 42pin DIP chips. But no matter what I do I cant get it to work. When I select the chip it tells me I need the 16BIT DIP 40 adapter. I am not sure if it is supposed to recognize the adapter on its own or not. Usually it shows a pic of the board and various settings on the left. Any thoughts? I am stuck and in a bind as I need to get these chips out the door.

Thanks!
Reply #1

ZLM

2937 Posts

Posted - 12/01/2014 :  20:06:19  Show Profile  Reply with Quote
The PCB5.0 does not check the adapter. So, the adapter in software should be resented always.
Go to Top of Page
Reply #2

shas595

2 Posts

Posted - 12/02/2014 :  09:26:33  Show Profile  Reply with Quote
So when I put the adapter on, what are the jumper settings supposed to be. I did the dip settings but the chips are not reading and blank checking.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000