MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 problem writing CAT28f102N 27C1024
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

chris0815

2 Posts

Posted - 07/08/2015 :  09:20:28  Show Profile  Reply with Quote
Hi,

out of 100 attempts maybe one or two times in can sucessfully write a chip.
is this a connection problem on one of the pins?
i would appreciate it if someone could help me solve this problem.


Image Insert:

[size=1] 167.63 KB[/size=1
Reply #1

ZLM

2937 Posts

Posted - 07/08/2015 :  11:21:30  Show Profile  Reply with Quote
It looks like one pin is not contacted good. Based on the error message is on address 0x00201, then you may need to pay attention on A10 pin of the chip. Also check the pin route to the adapter and then programmer black ZIF socket.
You should alwasy get the correct ID. If not, then it must be something is wrong and do not try to read and write.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000