MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X, GQ-3X, GQ-4X)
 GQ-4X ZIF Socket Mounting
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Krankshaft

10 Posts

Posted - 10/29/2015 :  06:42:50  Show Profile  Reply with Quote
Is the ZIF socket on the GQ-4X soldered directly to the PCB?

Or is it inserted into a socket that is soldered to the PCB?

Just asking for future reference in case I have any contact issues.
Reply #1

ZLM

2923 Posts

Posted - 10/29/2015 :  19:41:40  Show Profile  Reply with Quote
The ZIF socket is on a ZIF module, called ADP-089.
See:
http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4458

And then the module plugged on the main PCB board.
Go to Top of Page
Reply #2

Krankshaft

10 Posts

Posted - 10/30/2015 :  05:09:49  Show Profile  Reply with Quote
So it's secured to the main PCB by brass standoffs and 4 screws to keep the .100 header firmly connected?
Go to Top of Page
Reply #3

ZLM

2923 Posts

Posted - 11/07/2015 :  18:59:22  Show Profile  Reply with Quote
no screws needed.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.14 sec. Snitz Forums 2000