MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X, GQ-3X, GQ-4X)
 GQ-4X software locks up (v6.38)
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

TimP

10 Posts

Posted - 04/17/2016 :  15:41:35  Show Profile  Reply with Quote
Having some real issues with my programmer - worked fine up until recently.

It will do any of the following:

1) Not recognize the programmer when connected.
2) message saying the programmer is busy
3) software locks up

Not a "pirate" unit as I bought it directly from MCUmall

Have removed and reinstalled both the driver and GQ Programmer software.

Any ideas?

Reply #1

TimP

10 Posts

Posted - 04/17/2016 :  15:43:08  Show Profile  Reply with Quote
Just to add, it will eventually work - but it is getting harder and hard to get to the point of it working.

Different USB ports tried as well.
Go to Top of Page
Reply #2

ZLM

2923 Posts

Posted - 04/18/2016 :  06:50:09  Show Profile  Reply with Quote
USB cable?
Go to Top of Page
Reply #3

TimP

10 Posts

Posted - 05/05/2016 :  04:28:16  Show Profile  Reply with Quote
Hi,

Yes, also tried a different USB cable and I get a similar response. :(
Go to Top of Page
Reply #4

ZLM

2923 Posts

Posted - 05/05/2016 :  22:58:39  Show Profile  Reply with Quote
Try on another computer, if the problem still there, then something is wrong with the programmer.
Go to Top of Page
Reply #5

ZLM

2923 Posts

Posted - 05/17/2016 :  07:30:58  Show Profile  Reply with Quote
Always buy genuine version programmer.
Go to Top of Page
Reply #6

voodoop

15 Posts

Posted - 05/08/2019 :  23:56:34  Show Profile  Reply with Quote
I have the same problem .
I see that there are many with this problem .
A resolution must be given .
Go to Top of Page
Reply #7

anniel

1996 Posts

Posted - 05/09/2019 :  02:50:15  Show Profile  Reply with Quote
quote:
Originally posted by voodoop

I have the same problem .
I see that there are many with this problem .
A resolution must be given .

You tried all the solutions?
Go to Top of Page
Reply #8

voodoop

15 Posts

Posted - 05/09/2019 :  04:14:17  Show Profile  Reply with Quote
quote:
Originally posted by anniel

quote:
Originally posted by voodoop

I have the same problem .
I see that there are many with this problem .
A resolution must be given .

You tried all the solutions?

New cables , new ports , new computers , old and new drivers .
Go to Top of Page
Reply #9

anniel

1996 Posts

Posted - 05/09/2019 :  04:19:39  Show Profile  Reply with Quote
quote:
Originally posted by voodoop

quote:
Originally posted by anniel

quote:
Originally posted by voodoop

I have the same problem .
I see that there are many with this problem .
A resolution must be given .

You tried all the solutions?

New cables , new ports , new computers , old and new drivers .

It must be your programmer then.
Go to Top of Page
Reply #10

voodoop

15 Posts

Posted - 05/09/2019 :  05:57:29  Show Profile  Reply with Quote
That's why I said that a solution must be given .
Go to Top of Page
Reply #11

anniel

1996 Posts

Posted - 05/09/2019 :  06:41:40  Show Profile  Reply with Quote
quote:
Originally posted by voodoop

That's why I said that a solution must be given .

Did you open it up?
Go to Top of Page
Reply #12

voodoop

15 Posts

Posted - 05/09/2019 :  06:59:54  Show Profile  Reply with Quote
Not yet .
Go to Top of Page
Reply #13

anniel

1996 Posts

Posted - 05/09/2019 :  08:48:25  Show Profile  Reply with Quote
quote:
Originally posted by voodoop

Not yet .

That would be your next step to have a look at the solder joints of the USB.
Go to Top of Page
Reply #14

bersch8688

1 Posts

Posted - 06/17/2019 :  22:49:37  Show Profile  Reply with Quote
have anyone Solution

Same problem here
Go to Top of Page
Reply #15

anniel

1996 Posts

Posted - 06/18/2019 :  03:26:11  Show Profile  Reply with Quote
quote:
Originally posted by bersch8688

have anyone Solution

Same problem here

Just redo the solder joints if it's the same problem or change the jack if contacts are used or broken.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.17 sec. Snitz Forums 2000