MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X, GQ-3X, GQ-4X)
 Please Add 16F1788 support -popular
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

davesaudio2

Canada
9 Posts

Posted - 09/11/2016 :  07:23:37  Show Profile  Reply with Quote
Seeing this chip in more shared projects, please add support.
Dave
Reply #1

ZLM

2939 Posts

Posted - 09/11/2016 :  23:04:01  Show Profile  Reply with Quote
Try following lines and download the attached .dev files.

Name="PIC16F1782",ID="2927A0",Class="PIC16FXXX",Category="MCU",VPP="9V",WVPP="9V",MFG="Microchip",CFGAddress(Hex)="8007",CodeSize="4096",EepromSize="256",Package="DIP28",BEGPRG_COMMAND="8",ENDPRG_COMMAND="0A",BEGERASECHIP_COMMAND="9",ERASECHIP_COMMAND="",EEPROMHexFileAddress(Hex)="1E000",CFGHexFileAddress(Hex)="1000E",UserIDHexFileAddress(Hex)="10000";
Name="PIC16F1783",ID="2927A0",Class="PIC16FXXX",Category="MCU",VPP="9V",WVPP="9V",MFG="Microchip",CFGAddress(Hex)="8007",CodeSize="4096",EepromSize="256",Package="DIP28",BEGPRG_COMMAND="8",ENDPRG_COMMAND="0A",BEGERASECHIP_COMMAND="9",ERASECHIP_COMMAND="",EEPROMHexFileAddress(Hex)="1E000",CFGHexFileAddress(Hex)="1000E",UserIDHexFileAddress(Hex)="10000";
Name="PIC16F1784",ID="2927A0",Class="PIC16FXXX",Category="MCU",VPP="9V",WVPP="9V",MFG="Microchip",CFGAddress(Hex)="8007",CodeSize="4096",EepromSize="256",Package="DIP40",BEGPRG_COMMAND="8",ENDPRG_COMMAND="0A",BEGERASECHIP_COMMAND="9",ERASECHIP_COMMAND="",EEPROMHexFileAddress(Hex)="1E000",CFGHexFileAddress(Hex)="1000E",UserIDHexFileAddress(Hex)="10000";
Name="PIC16F1786",ID="2927A0",Class="PIC16FXXX",Category="MCU",VPP="9V",WVPP="9V",MFG="Microchip",CFGAddress(Hex)="8007",CodeSize="4096",EepromSize="256",Package="DIP28",BEGPRG_COMMAND="8",ENDPRG_COMMAND="0A",BEGERASECHIP_COMMAND="9",ERASECHIP_COMMAND="",EEPROMHexFileAddress(Hex)="1E000",CFGHexFileAddress(Hex)="1000E",UserIDHexFileAddress(Hex)="10000";
Name="PIC16F1787",ID="2927A0",Class="PIC16FXXX",Category="MCU",VPP="9V",WVPP="9V",MFG="Microchip",CFGAddress(Hex)="8007",CodeSize="4096",EepromSize="256",Package="DIP40",BEGPRG_COMMAND="8",ENDPRG_COMMAND="0A",BEGERASECHIP_COMMAND="9",ERASECHIP_COMMAND="",EEPROMHexFileAddress(Hex)="1E000",CFGHexFileAddress(Hex)="1000E",UserIDHexFileAddress(Hex)="10000";
Name="PIC16F1788",ID="2927A0",Class="PIC16FXXX",Category="MCU",VPP="9V",WVPP="9V",MFG="Microchip",CFGAddress(Hex)="8007",CodeSize="4096",EepromSize="256",Package="DIP28",BEGPRG_COMMAND="8",ENDPRG_COMMAND="0A",BEGERASECHIP_COMMAND="9",ERASECHIP_COMMAND="",EEPROMHexFileAddress(Hex)="1E000",CFGHexFileAddress(Hex)="1000E",UserIDHexFileAddress(Hex)="10000";
Name="PIC16F1789",ID="2927A0",Class="PIC16FXXX",Category="MCU",VPP="9V",WVPP="9V",MFG="Microchip",CFGAddress(Hex)="8007",CodeSize="4096",EepromSize="256",Package="DIP40",BEGPRG_COMMAND="8",ENDPRG_COMMAND="0A",BEGERASECHIP_COMMAND="9",ERASECHIP_COMMAND="",EEPROMHexFileAddress(Hex)="1E000",CFGHexFileAddress(Hex)="1000E",UserIDHexFileAddress(Hex)="10000";



PIC16F1784.zip:
68381
Go to Top of Page
Reply #2

davesaudio2

Canada
9 Posts

Posted - 09/15/2016 :  08:07:33  Show Profile  Reply with Quote
Made the changes
GQ-4X does not read chip ID: unknown device 0000

both DIP and SOIC devices
Go to Top of Page
Reply #3

ZLM

2939 Posts

Posted - 09/15/2016 :  12:45:34  Show Profile  Reply with Quote
Can you confirm your chip location? For the 28 pin chip must pin 1 upward and top aligned.
Go to Top of Page
Reply #4

davesaudio2

Canada
9 Posts

Posted - 09/16/2016 :  06:00:31  Show Profile  Reply with Quote
Chips are installed correctly.
Tried 2 DIPs and 1 SOIC on ADAFRUIT's DIP adapter.
Does not identify chip.

Edited by - davesaudio2 on 09/16/2016 09:30:28
Go to Top of Page
Reply #5

davesaudio2

Canada
9 Posts

Posted - 09/16/2016 :  08:00:27  Show Profile  Reply with Quote
pickit2 with some mods will write but (on my test of today) stuck on config verify
some info here- https://sourceforge.net/p/gcbasic/discussion/629990/thread/ca49b406/#4685

(In case this provides some clues)

Edited by - davesaudio2 on 09/16/2016 09:29:45
Go to Top of Page
Reply #6

davesaudio2

Canada
9 Posts

Posted - 09/21/2016 :  04:34:45  Show Profile  Reply with Quote
ZLM-Any progress? Shall I have Digikey sent you a couple of chips?
Dave
Go to Top of Page
Reply #7

ZLM

2939 Posts

Posted - 09/26/2016 :  20:36:12  Show Profile  Reply with Quote
OK. You can send 1 or 2 chips to:

GQ Electronics LLC
5608 Delridge Way SW,
Seattle,WA 98106
USA

Go to Top of Page
Reply #8

davesaudio2

Canada
9 Posts

Posted - 11/14/2016 :  05:37:16  Show Profile  Reply with Quote
Any news on this?
Go to Top of Page
Reply #9

ZLM

2939 Posts

Posted - 11/14/2016 :  22:50:16  Show Profile  Reply with Quote
has some difficulty to get it work. But I will try again later soon.
Go to Top of Page
Reply #10

onlysteg

11 Posts

Posted - 01/15/2021 :  05:11:40  Show Profile  Reply with Quote
hi guys i need to program a PIC16F1788 but do you need an adapter? is there a pattern? or can I plug it directly into the gq 4x4 through a socket? can you advise me which one?
Go to Top of Page
Reply #11

anniel

2529 Posts

Posted - 01/15/2021 :  05:22:21  Show Profile  Reply with Quote
quote:
Originally posted by onlysteg

hi guys i need to program a PIC16F1788 but do you need an adapter? is there a pattern? or can I plug it directly into the gq 4x4 through a socket? can you advise me which one?

It goes directly in the ZIF, follow the device location in the software.
Go to Top of Page
Reply #12

onlysteg

11 Posts

Posted - 01/15/2021 :  05:24:20  Show Profile  Reply with Quote
ok ok so without adapter?
Go to Top of Page
Reply #13

onlysteg

11 Posts

Posted - 01/15/2021 :  05:30:41  Show Profile  Reply with Quote
sorry but it's the first time for me, where should I import the dev file, which is present in the zip file?
Go to Top of Page
Reply #14

anniel

2529 Posts

Posted - 01/16/2021 :  09:32:25  Show Profile  Reply with Quote
quote:
Originally posted by onlysteg

ok ok so without adapter?

What is the package of your device?
Go to Top of Page
Reply #15

anniel

2529 Posts

Posted - 01/16/2021 :  09:33:05  Show Profile  Reply with Quote
quote:
Originally posted by onlysteg

sorry but it's the first time for me, where should I import the dev file, which is present in the zip file?

Use the latest software.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.23 sec. Snitz Forums 2000