MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 GQ-5X
 K9GAG08UOE
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

CARLOSMONFER

Spain
6 Posts

Posted - 03/06/2017 :  09:30:25  Show Profile  Reply with Quote
Hello
I have a problem with the copy of a nand -K9GAG08UOE that on a samsung tv works correctly and try to record on a new chip K9GAG08UOE and once on the tv does not work (reboots).
It has been recorded in different ways and at different speeds ..also with the new tab smart copy (always with the same results) .. the nand is considered by the tv as bad .. and restart.
The programmer I use is GQ-5X with the latest version of soft 1.07
They have been tested with more nand chips but always the same
Checking the recorded memory gives verification errors
What is the problem? .. this programmer does not allow cloning nand memories?
REGARDS
Reply #1

monster

10 Posts

Posted - 03/07/2017 :  02:29:18  Show Profile  Reply with Quote
Hello,
I have the same problem with the same nand chip
Try every speed on 3 different computer and always errors on verification.
Go to Top of Page
Reply #2

CARLOSMONFER

Spain
6 Posts

Posted - 03/07/2017 :  10:35:23  Show Profile  Reply with Quote
Hello
When the programmer loses and its soft are not up to the height that the client needs
Hopefully a quick solution by this company or we will begin to distrust the quality of the product
Thanks for your interest
Go to Top of Page
Reply #3

monster

10 Posts

Posted - 03/08/2017 :  03:20:19  Show Profile  Reply with Quote
Hello,

i would like to test old versions of the GQblaster because i have the latest 1.07. Maybe old version work....but i can't find link for downloaded it.
Go to Top of Page
Reply #4

marck3

Brazil
5 Posts

Posted - 03/08/2017 :  06:42:11  Show Profile  Reply with Quote

I have this same problem, I have already tested with several new and used chipcs.Ja I did reading and writing at various speeds. The only one that recorded more or less, but on TV is restarting and at speed 9.
Go to Top of Page
Reply #5

marck3

Brazil
5 Posts

Posted - 03/08/2017 :  06:48:44  Show Profile  Reply with Quote
I think I'm not sure but it may be the speed of reading and writing that is high.
The only one that can record without problem and at tnm5000 no other can, I do not know why.
Go to Top of Page
Reply #6

monster

10 Posts

Posted - 03/09/2017 :  23:45:42  Show Profile  Reply with Quote
Hello,

i try read nand chip with an additional supply but i got same issue...
Somebody can give me a link to download the older version of GQblaster (1.05 or 1.06) please ?
Go to Top of Page
Reply #7

eduardo48

Argentina
152 Posts

Posted - 03/10/2017 :  17:22:04  Show Profile  Reply with Quote
Hola, Yo tengo las versiones, pero creo que la base del software es la misma, lo único agregado en versión 5 y 6 es no escribir en sectores defectuosos y en la 7 agregaron el botón Smart que hace todo automatico.
Tu puedes utilizar la versión 7 como si fuera la versión 5 sin el botón Smart, de esta manera erase, cargar archivo, write y verificar, pero si en el chip destino tenes sectores defectuosos la verificación es errónea.
Go to Top of Page
Reply #8

monster

10 Posts

Posted - 03/11/2017 :  07:18:38  Show Profile  Reply with Quote
thanks you for this explanation. So i don't understand why this nand make error reading during his dump....
GQ-5X reader indicated that K9GAG08UOE nand is fully compatible and i bought it mainly for this.....
Go to Top of Page
Reply #9

eduardo48

Argentina
152 Posts

Posted - 03/11/2017 :  09:31:34  Show Profile  Reply with Quote
Seguro que a este software le falta correcciones, pero te digo que graba bien la k9gag08uoe, uso en tv Samsung unxxd5500
Yo escribi, en chip nuevos sin botón Smart, ok
También tuve resultados buenos, con algunos chip del tv (usado)pero con botón Smart copy, pero no todos han funcionado.
Cual es tu problema exactamente.
Go to Top of Page
Reply #10

monster

10 Posts

Posted - 03/11/2017 :  11:29:41  Show Profile  Reply with Quote
my primary problem is to dump firmware of K9GAG08UOE nand. I can read it but the verification fail all the time.
I tried all the speed and 3 x K9GAG08UOE different source nand. I also try to add an external supply but results are
always the same : many errors during verification (and differents errors on every verification...)
Go to Top of Page
Reply #11

monster

10 Posts

Posted - 03/14/2017 :  10:41:04  Show Profile  Reply with Quote
Hello,

Somebody can give me a link to download the older version of GQblaster 1.05 please ?
Go to Top of Page
Reply #12

eduardo48

Argentina
152 Posts

Posted - 03/14/2017 :  16:59:07  Show Profile  Reply with Quote
Ver si puede bajar
https://drive.google.com/file/d/0B0B06KCMBQynZHZjNFFkVW9NQm8/view?usp=sharing
Go to Top of Page
Reply #13

monster

10 Posts

Posted - 03/16/2017 :  08:29:04  Show Profile  Reply with Quote
thanks !! i'll try it and i'll be back for results
Go to Top of Page
Reply #14

ez

1 Posts

Posted - 03/16/2017 :  18:27:44  Show Profile  Reply with Quote
hola , estoy por adquirir un gq-5x pero aun tengo inseguridades sobre la compatibilidad con las memorias samsung y los problemas que comentaron.
Hay que usar el soft 1.05 ?
En caso de que quiera leer un memoria que no figura en la lista del programa, como se añade?.
desde ya muchas gracias
Go to Top of Page
Reply #15

eduardo48

Argentina
152 Posts

Posted - 03/17/2017 :  04:27:00  Show Profile  Reply with Quote
Hola ez, si se puede añadir nand 8 bit, tenes que buscar el datasheet tomar los valores, hacer algunos cálculos, y convertirlos a hex, son el tamaño de la memoria, cantidad de bloques y tamaño de pagina, el soft 1.07 reconoce los valores ID.
Por el tema de verificación estoy probando nand nuevas luego comento.
Go to Top of Page
Reply #16

monster

10 Posts

Posted - 03/17/2017 :  22:55:26  Show Profile  Reply with Quote
Hello,
i tried 1.5 version but problems are the same....i can't dump K9GAG08U0E nand...
Always error on the verification step. I despair :-((((
Go to Top of Page
Reply #17

MANN France

France
51 Posts

Posted - 03/27/2017 :  15:43:46  Show Profile  Reply with Quote
quote:
Originally posted by monster

Hello,
i tried 1.5 version but problems are the same....i can't dump K9GAG08U0E nand...
Always error on the verification step. I despair :-((((


je suis nouveau dans ce forum ( achat il y a un mois , pour cloner les k9gag08U0E de cartes mères de tv UExxD5500 et 5700 ). échec à tout les coups de la vérification après programmation!!
je pense que le logiciel est incomplet , pour faire une copie bonne à tout les coup = voir mes post sur =
MCUmall Forums
GQ-5X
Clone failure K9GAG08U0E.

de plus les mémoires SAMSUNG me sembles instables pour les bad block et peu fiables en répétitivité . la solution serait que le logiciel fasse un mapping des données utiles à écrire , et refuse la copie si il y a des bad block au même endroit dans la mémoire "dite vierge" ...sinon sur la Tv il y a disfonctionnement par rebouclage indéfiniment du logo "smart TV"
Go to Top of Page
Reply #18

CARLOSMONFER

Spain
6 Posts

Posted - 08/25/2017 :  09:49:35  Show Profile  Reply with Quote
Hello
I have come to the conclusion after much time lost that this programmer is not worth it and it is a fraud and a failure
I have tested this Chinese and it goes well ..ProAND NAND NAND PROGRAMMER Professional / NI TSOP48 FLASH NAND PROGRAMMER TL866 PLUS PROGRAMMER / HIGH SPEED PROGRAMMING --- for 100 €
regards
Go to Top of Page
Reply #19

marquitos550b

Argentina
14 Posts

Posted - 08/25/2017 :  13:56:18  Show Profile  Reply with Quote
Hi Carlos, I do not think gq5x is a fraud. I agree that software lacks a lot and that sometimes we lose a lot of time.
Could you comment on how you did to program the memories with the ProMan? Did you copy from a working TV, reused the chips or are they new chips ?. Please comment.

Regards
Marcos.
Go to Top of Page
Reply #20

GQ5XSupport

104 Posts

Posted - 08/26/2017 :  03:42:25  Show Profile  Reply with Quote
Have you tried 1.09? In previous version, the definition of the chip was wrong.
Go to Top of Page
Reply #21

skdaddy69

10 Posts

Posted - 08/29/2017 :  13:56:01  Show Profile  Reply with Quote
I'm using version 1.09 to program K9GAG08U0E.
I took a good programed IC and "READ" using speed 10. Saved the file and inserted a new empty chip and programed on speed 10. - DIDN'T WORK.
After, I did the same on speed 5 (READ and WRITE)and had a better results.
Total of 3 ICs were programed and work good, but 2 still a problem.
I'll have to order couple of new chips and see if it is a problem with ICs or .....????

skdaddy69
Go to Top of Page
Reply #22

thetan76

Russia
23 Posts

Posted - 08/30/2017 :  09:51:17  Show Profile  Reply with Quote
Dear All,
I can confess that I successfully programmed 3 K9GAG08U0E for BN41-01661 Samsung MB. All three work and gave back to my clients. And it paid off all my expenses plus a good margin. :) Thanks for the product.

ss
Go to Top of Page
Reply #23

thetan76

Russia
23 Posts

Posted - 08/30/2017 :  09:52:43  Show Profile  Reply with Quote
Now I need a socket for BGA63 and BGA169

ss
Go to Top of Page
Reply #24

eduardo48

Argentina
152 Posts

Posted - 08/30/2017 :  12:40:01  Show Profile  Reply with Quote
Hi thetan76. Bga socket for the onenand kfg1gn6w20?
Go to Top of Page
Reply #25

thetan76

Russia
23 Posts

Posted - 08/31/2017 :  20:44:45  Show Profile  Reply with Quote
Nop, MT29F2G08ABAEAH4, for example.

ss
Go to Top of Page
Reply #26

anniel

1996 Posts

Posted - 09/15/2017 :  03:54:37  Show Profile  Reply with Quote
quote:
Originally posted by thetan76

Now I need a socket for BGA63 and BGA169



Good ones are expensive.
Go to Top of Page
Reply #27

thetan76

Russia
23 Posts

Posted - 09/19/2017 :  23:33:39  Show Profile  Reply with Quote
quote:
Originally posted by anniel

quote:
Originally posted by thetan76

Now I need a socket for BGA63 and BGA169



Good ones are expensive.



Yes, and it is a request to the manufacturer. We need to move forward.

ss
Go to Top of Page
Reply #28

anniel

1996 Posts

Posted - 09/20/2017 :  02:38:45  Show Profile  Reply with Quote
quote:
Originally posted by thetan76

quote:
Originally posted by anniel

quote:
Originally posted by thetan76

Now I need a socket for BGA63 and BGA169



Good ones are expensive.



Yes, and it is a request to the manufacturer. We need to move forward.



Yes, smaller and smaller packages for bigger and bigger TVs.
Go to Top of Page
Reply #29

Willyxr

26 Posts

Posted - 12/24/2017 :  18:15:59  Show Profile  Reply with Quote
this programmer not work correctly.

in tv samsung UNxx5500 the smart function none works.

fail with any manufacturer of memories

this programmer are a scam.
i lost my time, my money in this.

this programmer keep contiunes sold and offering as a support for samsung tv with memories k9gag08u0e, and that is NOT TRUE !!!
Go to Top of Page
Reply #30

anniel

1996 Posts

Posted - 12/25/2017 :  13:52:09  Show Profile  Reply with Quote
quote:
Originally posted by Willyxr

this programmer not work correctly.

in tv samsung UNxx5500 the smart function none works.

fail with any manufacturer of memories

this programmer are a scam.
i lost my time, my money in this.

this programmer keep contiunes sold and offering as a support for samsung tv with memories k9gag08u0e, and that is NOT TRUE !!!



Yes it works correctly with all supported devices and then some.
You are a scam. A real technician would be able to operate such a simple apparatus.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.83 sec. Snitz Forums 2000