MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 GQ-4X writes but does not verify
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Unoproblemo

USA
1 Posts

Posted - 09/14/2017 :  09:12:40  Show Profile  Reply with Quote
I am trying to program 24C16 chips and they are all blank. There is no ID Check but when I read it, its all FF. I load my .hex files and try to write it on the chip.
It goes till 100% and then Verify Failed, Address: 0x000000, Device: 0xFF, Buffer= 0x02 shows up.

How do I proceed? I tried cleaning the pins, using different USB ports, reinstalling the drive and software, Has the PSU too.

Any help would be appreciated guys!

Needhi
Reply #1

anniel

2531 Posts

Posted - 09/15/2017 :  02:45:59  Show Profile  Reply with Quote
Did you try a lower speed?
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.1 sec. Snitz Forums 2000