MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 GQ-5X
 programming TC58NVG3S0FTAI0
 Forum Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

thetan76

Russia
23 Posts

Posted - 11/21/2017 :  09:21:36  Show Profile
For two days in a row I tried to program TC58NVG3S0FTAI0 and its cosines and I failed. First of all, the programmer says that the dump contains several thousands of bad block however the chip I read the dump from is clean of them. Then whatever I did the programmer could not do the job the dump never verified with the chip. It looks like some areas could not be programmed by the device leaving them blank. I tried different chips with the same result but the same chips were successfully programmed by RT809H. I programmed the chip for Sony Main Board 1-889-202-22. It does not work yet. Dear Support Team, please check this problem and fix it. Thanks in advance.

ss
Reply #1

GQ5XSupport

104 Posts

Posted - 11/22/2017 :  10:44:39  Show Profile
Most likely the definition the software picks does not match your chip.
How did you configure the chip?
Go to Top of Page
Reply #2

thetan76

Russia
23 Posts

Posted - 11/23/2017 :  09:46:19  Show Profile
Sorry, I do not have the config data on this computer but I configured the chip exactly per its datasheet.

ss
Go to Top of Page
Reply #3

GQ5XSupport

104 Posts

Posted - 11/24/2017 :  11:30:36  Show Profile
You need to post the config you made and the link of the datasheet.
Should be a simple config fix.
Go to Top of Page
Reply #4

thetan76

Russia
23 Posts

Posted - 12/07/2017 :  01:30:24  Show Profile
Here is the line from the config
Name="TC58NVG3S0FTAI0",MFG="Toshba",ID1="98h",ID2="d3h",ID3="90h",ID4="26h",ID5="76h",ID6="15h",size="42000000h",PageSize="1080h",BlockSize="100h",CE="1"

ss
Go to Top of Page
Reply #5

eduardo48

Argentina
152 Posts

Posted - 12/07/2017 :  17:19:41  Show Profile
you can verify
size=43a00000h
page size= 10e8h
block size = 40h
Go to Top of Page
Reply #6

elbronco

Argentina
26 Posts

Posted - 02/22/2018 :  16:49:19  Show Profile
The Thetan76 user should confirm if he could record the memory and if so, give thanks for the help received in this community.
Go to Top of Page
Reply #7

anniel

2564 Posts

Posted - 02/22/2018 :  17:31:49  Show Profile
quote:
Originally posted by elbronco

The Thetan76 user should confirm if he could record the memory and if so, give thanks for the help received in this community.



True but no rewards or follow-ups are expected...
Go to Top of Page
Reply #8

elbronco

Argentina
26 Posts

Posted - 02/24/2018 :  13:57:08  Show Profile
Not only is it rewards, but there are users (me included) who are reading the post and we do not know if the information we are reading is reliable because the user who asked the question does not value the answers and, or, does not appreciate the solution.
CLEAR THAT IF, ALL SHOULD GIVE THANKS, IS BASIC, AN AUTOMATIC REFLECTION WHEN HELP IS RECEIVED. (I say to thetan76)
Greetings, Mr. Anniel, you have always answered my questions.
Go to Top of Page
Reply #9

anniel

2564 Posts

Posted - 02/25/2018 :  05:11:47  Show Profile
quote:
Originally posted by elbronco

Not only is it rewards, but there are users (me included) who are reading the post and we do not know if the information we are reading is reliable because the user who asked the question does not value the answers and, or, does not appreciate the solution.
CLEAR THAT IF, ALL SHOULD GIVE THANKS, IS BASIC, AN AUTOMATIC REFLECTION WHEN HELP IS RECEIVED. (I say to thetan76)
Greetings, Mr. Anniel, you have always answered my questions.




Generally when you don't hear back from someone the last solution proposed was successful.
Go to Top of Page
  Previous Topic Topic Next Topic  
 Forum Locked
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000