MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Using The Enhanced/Dual power Willem Programmer
 How to use 16 bit adapter?
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

SteveM

USA
2 Posts

Posted - 10/11/2007 :  21:29:50  Show Profile  Reply with Quote
I've read some smaller EPROMs on my Dual Power without problem. I'm trying to read a 4mbit EPROM using the 16 bit adapter. There's absolutely no documentation I can find anywhere about using the 16bit adapter. I assume I have it oriented properly, I have the jumpers set to "normal" and I have the DIP switches set to what the software tells me. The other window where it usually displays the picture just says "Require adapter" and that's all. What am I missing here? Thanks.
Reply #1

ZLM

2936 Posts

Posted - 10/12/2007 :  10:23:42  Show Profile  Reply with Quote
Most of instructions are printed on the adapter.
What is the exact your EPROM part number?
Go to Top of Page
Reply #2

SteveM

USA
2 Posts

Posted - 10/13/2007 :  00:09:54  Show Profile  Reply with Quote
It's a 27C4096. The only instructions on the adapter are for the jumper. Nothing tells me about any other jumpers or orientation.
Go to Top of Page
Reply #3

ZLM

2936 Posts

Posted - 10/14/2007 :  08:01:56  Show Profile  Reply with Quote
For this chip there are no extra jumper and cable on adapter setting are needed.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.19 sec. Snitz Forums 2000