MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 True USB Willem Programmer (GQ-2X,3X,4X & GQ-4x4)
 What USB Port?
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Pirate-007

5 Posts

Posted - 06/19/2020 :  06:27:01  Show Profile  Reply with Quote
Hi,
I have the following Setup:

MCUMall GQ-4x4 Programmer
USB Driver Re.3.0
Software Re. 7.25
running on
Win 10 Pro 1903 build 18362.476 64-bit
Now: Connected at USB 3.0 Gen 1 port
Additional power supply connected to the programmer

Question: Will I have a loss in speed performance when I connect it to a USB 2.0 port?
(The cable in the box is no USB 3.0 cable)

Best regards
Pirate-007

Edited by - Pirate-007 on 06/19/2020 23:54:06
Reply #1

anniel

2529 Posts

Posted - 06/19/2020 :  08:51:55  Show Profile  Reply with Quote
quote:
Originally posted by Pirate-007

Hi,
I have the following Setup:

MCUMall GQ-4x4 Programmer
USB Driver Re.3.0
Software Re. 7.25
running on
Win 10 Pro 1903 build 18362.476 64-bit
Now: Connected at USB 3.0 Gen 1 port
Additional poswer supply connected to the Programmer

Question: Will I have a loss in speed performance when I connect it to a USB 2.0 port?
(The cable in the box is no USB 3.0 cable)

Best regards
Pirate-007

I don't think so but best way is to try.
Go to Top of Page
Reply #2

Pirate-007

5 Posts

Posted - 06/19/2020 :  23:55:01  Show Profile  Reply with Quote
Thank you!
I will do some tests and report here.
Pirate
Go to Top of Page
Reply #3

anniel

2529 Posts

Posted - 06/20/2020 :  04:36:56  Show Profile  Reply with Quote
quote:
Originally posted by Pirate-007

Thank you!
I will do some tests and report here.
Pirate

Excellent. Test results are always welcome.
Go to Top of Page
Reply #4

ricsne2010

USA
4 Posts

Posted - 04/24/2022 :  12:26:55  Show Profile  Reply with Quote
If the device you have does not support USB 3.0 (and I don't thnk the 4x4 does otherwisse the spec's would indicate that) then the USB port on your computer will become "backward compatable" - provided within the BIOS of your machine you enable that (USB 1.0 or 2.0)

If your machine does not require having that feature enabled (most newere BIOS system's don't) then the USB port (and any other associated with that particular bus) will be reduced to USB 2.0 speeds.

Simply changing the cable to a USB 3.0 cable does not make the device a USB 3.0 compliant device... now if you have a USB 3.0 compliant device and you attempt to use a USB 2.0 cable, you will notice issues (depending the operation) as the USb 2.0 cables cannot handle the various frequencies and speeds that the 3.0 cables are built and tested at.... so you can anticiapte unusual issues when doing that... in some cases, the computer will simply revert to USB 2.0 if the port detects various levels of errors......

Cheers
Rich
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000