MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 What am I doing wrong?
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

joanen

4 Posts

Posted - 05/26/2008 :  23:22:13  Show Profile  Reply with Quote
Hi all:

I bought a few days ago enhanced JDM v1 (whith ZIF socket, 2 jumpers) programmer and ran to first. I did not have any problem until I tried external power. With 12v in correct polarity and jp2 with pins 1-2 shorted, the progammer is not going. If I remove the 12v and leave jp2 with pins 2-3 shorted, everything returns to work.
Please, can anyone tell me what I'm doing wrong?. Thank you
Reply #1

joanen

4 Posts

Posted - 05/29/2008 :  07:28:17  Show Profile  Reply with Quote

Nobody can tell me how to use external power?

Thanks

Go to Top of Page
Reply #2

ZLM

2937 Posts

Posted - 05/29/2008 :  08:53:47  Show Profile  Reply with Quote
The 12V external VPP is not for power. It only to help with COM port has lower VPP.

If your JDM programmer is working fine without the external VPP, then you do not need that.
Go to Top of Page
Reply #3

joanen

4 Posts

Posted - 05/30/2008 :  02:33:16  Show Profile  Reply with Quote
Thank you for responding.

Ok, I already know, but, the programmer would not have to operate equally with external power and pin 1-2 shorted in JP2?. So, why Picpgm said "Device not connected" when in fact there is a 18 pins pic?.

Go to Top of Page
Reply #4

ZLM

2937 Posts

Posted - 05/31/2008 :  08:16:32  Show Profile  Reply with Quote
There are different JDM programmer software available. They all use different way to detect the programmer. So, maybe the software bug causes this problem.
Go to Top of Page
Reply #5

joanen

4 Posts

Posted - 06/04/2008 :  04:50:27  Show Profile  Reply with Quote

I tested with Icprog, Wimpic and Picpgm. Allways the same. With external power, programmer don't work.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000