MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 Top2004 with Intel D27513 = major headache
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

brandon9271

2 Posts

Posted - 06/03/2008 :  12:37:47  Show Profile  Reply with Quote
Im having a major headache with this odd chip. It's a paged EPROM with 4 16k pages. Its made by Intel but it isnt listed under Intel. Its listed under several different manufacturers: General, Microchip and "???" Well, every time I read the EPROM it gives a different checksum so I have very little faith that these are being read correctly.. any advice??

BTW, What I *think* is happening is its trying to read them like a regular 27512. The 27513 only has 14 address lines. The other two pins are Write Enable and RESET (control lines for bank selection) so when it tries to access the upper addresses its just randomly switching banks and thus getting random data at every read.

Edited by - brandon9271 on 06/03/2008 19:09:29
Reply #1

brandon9271

2 Posts

Posted - 06/10/2008 :  16:34:41  Show Profile  Reply with Quote
Well I can say with 100% certainty that the Top2004 does not read or write the Intel 27513 EPROM collectly even though it says it does. I have tried for over a week and had zero luck. The most obvious was to know something is wrong is to note that everytime you read a 27513 the checksum is different. Also, if you insert a 27C512 in there instead of the 27513 it still reads the data correctly.. One has 14 bit address the other has 16 so it shouldnt read both 27512 and 27513 the same.. What a POS
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000