MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Open Source Project Willem Programmer Hardware
 Pinout - Schematics for TSOP40B-DIP32
 New Topic  Reply to Topic
 Printer Friendly
Author  Topic Next Topic  

woonkey

USA
5 Posts

Posted - 12/15/2023 :  09:30:14  Show Profile  Reply with Quote
Hello everyone,

Is this forum still alive?? If there is anyone reading this post. Would you happen to have or know where I can obtain a pinout for the TSOP40B Base board adapter? I'm working on building a custom adapter for the AM29F080 EEPROM and dont want to go through the pain of tracing each pin. Thank you!

Geoffrey with a "G"

Geoffrey with a "G"
Reply #1

woonkey

USA
5 Posts

Posted - 12/15/2023 :  09:33:13  Show Profile  Reply with Quote
This seems to be the closest thing I can find:

https://www.mcumall.com/forum/topic.asp?TOPIC_ID=6841

Can anyone confirm the pin out here?

Geoffrey with a "G"
Go to Top of Page
Reply #2

woonkey

USA
5 Posts

Posted - 12/15/2023 :  10:46:26  Show Profile  Reply with Quote
Does this look right?

https://photos.app.goo.gl/A8CggKgSvnZ3R3zDA

Geoffrey with a "G"
Go to Top of Page
Reply #3

anniel

2542 Posts

Posted - 12/15/2023 :  13:35:15  Show Profile  Reply with Quote
quote:
Originally posted by woonkey

Does this look right?

https://photos.app.goo.gl/A8CggKgSvnZ3R3zDA


You would need to trace it to be certain.
Go to Top of Page
Reply #4

woonkey

USA
5 Posts

Posted - 12/15/2023 :  13:58:04  Show Profile  Reply with Quote
Hey Anniel,

I've seen a lot of your posts on this forum. Thank you for your support!

What I really need is the mapping for the TSOP40B base board in order to make my adapter. Would you happen to know what it is?

The chip I'm working with is the AM29F080, which requires that adapter to program. So, if I can get the pin out for that board, I should be able to make my adapter.

Thanks again!

PS - The pinouts I posted were from one of your older posts I referenced earlier.

Geoffrey with a "G"
Go to Top of Page
Reply #5

anniel

2542 Posts

Posted - 12/16/2023 :  05:59:21  Show Profile  Reply with Quote
quote:
Originally posted by woonkey

Hey Anniel,

I've seen a lot of your posts on this forum. Thank you for your support!

What I really need is the mapping for the TSOP40B base board in order to make my adapter. Would you happen to know what it is?

The chip I'm working with is the AM29F080, which requires that adapter to program. So, if I can get the pin out for that board, I should be able to make my adapter.

Thanks again!

PS - The pinouts I posted were from one of your older posts I referenced earlier.

Pinout on the GQ-4X has not changed.
Go to Top of Page
   Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.09 sec. Snitz Forums 2000