MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 Novice Place
 Do I need an AC adapter?
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Alpinab7

2 Posts

Posted - 08/04/2008 :  17:19:44  Show Profile  Reply with Quote
I am trying to burn some eproms which require 12.5v +-.5v. I have the Willem USB gq-2x. Do I need an adapter as well? The eproms do not work in the device they are in. I'm assuming a USB port is 5V so I need an AC adapter to write them. Correct? I see people talking about changing voltage settings. I don't see any way to do that on the screen. Does my programmer not support it? Or will it support it with the ac adapter? Or am I just not looking in the right place?
Reply #1

ZLM

2937 Posts

Posted - 08/05/2008 :  13:56:59  Show Profile  Reply with Quote
You do not need AC adapter. The USB GQ-2X has on board DC-DC voltage step up circuit. It will adjust the voltage to 12.5V.

If your chip is listed in the supported list, then it should be working.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.08 sec. Snitz Forums 2000