MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 TOP USB Programmer
 ALL TopWin Version TOP2048 59C11 EEPROM
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Frank24

Germany
5 Posts

Posted - 09/29/2005 :  04:58:34  Show Profile  Reply with Quote
Hi,
at first greetings to all forum-members from germany.

My problem:
I bought a Top2048 to read and write 59C11.
Today the Top2048 arrived and it works fine, only when i choose the type 59c11 serial Eeprom nothing happens (no window for read/write).
I tried software version 1.72, 1.63, 1.50, 1.39

regards
Frank
Reply #1

usb

138 Posts

Posted - 09/29/2005 :  11:27:28  Show Profile  Reply with Quote
It seems the software does not configed for this chip.

Anyway, the 59C11 maybe compatible with 93C46 8bit or 16 bit mode.

Try that.
Go to Top of Page
Reply #2

Frank24

Germany
5 Posts

Posted - 09/29/2005 :  23:55:54  Show Profile  Reply with Quote
Hi usb,
thanks for your answer. Do you try it with your TOPXXXX ?
I looked in the datasheets for 59c11 and 93C46 and found that the 59c11 have two additional pins (ORG and RDY/BUSY).
The ORG pin is to switch the Organisation of the 59c11 (128x8 or 64x16). The 93c46 is available in different organsations (A,B,C,AA..)
I will try it with the 93c46 mode, but not with my originals.
I get new 59c11 in the next days.

regards
Frank
Go to Top of Page
Reply #3

usb

138 Posts

Posted - 10/03/2005 :  10:44:13  Show Profile  Reply with Quote
RDY/BUSY pin on 59C11 is outpu pin, so, you can ignor that pin.

The AT93C46 has the ORG pin. So, try AT93C46 (both 8 or 16 bit mode).
Go to Top of Page
Reply #4

Frank24

Germany
5 Posts

Posted - 10/06/2005 :  11:12:48  Show Profile  Reply with Quote
Bad news,
i try to write different 93c46 (128Kx8)
there are funny results when i read the written bytes.

Frank
Go to Top of Page
Reply #5

Frank24

Germany
5 Posts

Posted - 10/09/2005 :  03:51:11  Show Profile  Reply with Quote
Hello,
i got bad news.
The manufacturer says the 59c11 is to old and deleted the item in the new Version 1.73 of TopWin. Funny is, that they leave the entry for the NM59c11 as a dummy.
Also i try to program 93c46 in 16 Bit mode. It does not work.
I bought a Willem-Programmer. Both type of serial EEPROM are working fine.

regards
Frank
Go to Top of Page
Reply #6

ZLM

2937 Posts

Posted - 10/11/2005 :  13:37:06  Show Profile  Reply with Quote
That's strange. The chip should be compatible with 93CXX.
Anyway, you got it worked on Willem programmer.
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.07 sec. Snitz Forums 2000