| Author |
 Topic  |
|
|
Lord_Anubis
3 Posts |
 Posted - 11/06/2005 : 15:24:18
|
I just purchased a MCS-51+Adapter & Enhanced Willem EPROM Programmer ATMEL with the hopes of reprogramming motherboard bios chips. I cannot find this chip (W49F002UP70B) in the device listing, have tried W49V002A & W49V002FA without success. There are no other WINBOND device listings that I can see. I know it is a W49002U 32pin PLCC 2 megabit, 5 volt CMOS flash memory (http://www.alldatasheet.com/datasheet-pdf/pdf/47674/WINBOND/W49F002UP70B.html).
So my question is, is the programmer I purchased compatible? Am I doing something wrong? When I try reading the red light comes on and for hardware id I get 0x4, 0x4, Fujitsu. Writing and verify both fail instantly.
Any help would be appreciated, thanks. |
|
| Reply #1
backbiter17
Slovenia
23 Posts |
Posted - 11/07/2005 : 06:13:41
|
this chip is located under Firmware HUB/LPC
you shod use fhw/lpc socket to ptogram this device
br, ales |
 |
|
| Reply #2
Lord_Anubis
3 Posts |
Posted - 11/08/2005 : 07:22:04
|
I understand what you are saying (about using fhw/lpc socket to program), only thing is I cannot locate my chip in the program. Take a look at the pic and you will see what I mean. If I am looking in the wrong spot please tell me so I can find the error in my ways. Thanks for any and all help.
[URL=http://img175.imageshack.us/my.php?image=question1zx.jpg] [/URL] |
Edited by - Lord_Anubis on 11/08/2005 07:23:46 |
|
|
| Reply #3
backbiter17
Slovenia
23 Posts |
Posted - 11/08/2005 : 12:01:34
|
why dont you try same other brands?
br, ales |
|
|
| Reply #4
Lord_Anubis
3 Posts |
Posted - 11/08/2005 : 17:56:50
|
| awesome that worked perfectly, I never would have guessed selecting device AT49F002 would work but it did. Thanks so much. |
|
|
| |
Topic |
|
W49F002UP70B
