MCUmall EPROM BIOS Chip Burner Forum
MCUmall EPROM BIOS Chip Burner Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 MCUmall Forums
 PIC Programmer
 12F510 support for the PRG-017
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

gdisanto

1 Posts

Posted - 12/11/2008 :  15:56:54  Show Profile  Reply with Quote
Are there any near term plans to support the 12F510 with the PRG-017 programmer? Is there any way for me to trick it into programming this device?
Reply #1

ZLM

2937 Posts

Posted - 12/16/2008 :  21:09:53  Show Profile  Reply with Quote
Try to add following text into CHIPINFO.cid:

=================================
CHIPname=12F510
INCLUDE=Y
SocketImage=8pin
EraseMode=6
FlashChip=Y
PowerSequence=VccVpp2
ProgramDelay=20
ProgramTries=1
OverProgram=1
CoreType=bit12_A
ROMsize=000400
EEPROMsize=00000000
FUSEblank=0FFF
CPwarn=N
CALword=Y
BandGap=N
ICSPonly=N
ChipID=FFFF
LIST1 FUSE1 "WDT" "Enabled"=0FFF "Disabled"=0FFB
LIST2 FUSE1 "MCLRE" "Enabled"=0FFF "Disabled"=0FEF
LIST3 FUSE1 "Oscillator" "EX_RC"=0FFF "IN_RC"=0FFE "XT"=0FFD "LP"=0FFC
LIST4 FUSE1 "Code Protect" "Disabled"=0FFF "Enabled"=0FF7
================================

The Fuse section need some modification based on the datasheet.

Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
MCUmall EPROM BIOS Chip Burner Forum © Copyright 2003 - 2009 Mcumall Electronics Inc. Go To Top Of Page
Generated in 0.07 sec. Snitz Forums 2000